Husqvarna MZ6128/966613103 Cutting Height Adjuster, Seat Adjustment Lever, Fuel Shut Off Valve

Page 22

CONTROLS

Cutting Height Adjuster

The desired cutting height is set with the height pin. The cutting height pedal releases the deck lift to place the deck and the selected height.

For transport, push the lift pedal fully forward until the deck lift latches in the transport (highest) position.

Seat Adjustment Lever

The seat can be adjusted lengthways. When making adjustments, the lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), after which the seat can be moved backward or forward.

Fuel Shut Off Valve

The fuel shut off valve is centered behind the rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line.

2

1

8058-223

1.Release pedal

2.Height pin

Cut height selection pedals

8011-441

Lengthways adjustment

8065-010

Fuel shut off valve in the CLOSED position.

22

Image 22

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxWhole body Safety Instructions SafetyGeneral Operation Never take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Choke Control Hour MeterTracking Knob Ignition Switch Blade SwitchParking Brake Fuses Seat Adjustment Lever Cutting Height AdjusterFuel Shut Off Valve Fuel Tank Hydro Release LeversTraining OperationSteering Before Starting Starting the Engine Open the fuel tank valve Press in and turn the ignition key to the start position Weak Battery To remove cables, reverse orderRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Maintenance Maintenance ScheduleMaintenance Battery Replacing batterySafety System Tire PressuresDeck Belt Deck Belt InstallationDeck Belt Removal Belts Belt InstallationPump Belt Replacing Pump BeltCutting Blades Adjusting the Mower Deck Leveling deckAnti-scalp rollers Caster Wheels CleaningUse protective glasses when cleaning and washing HardwareLubrication Schedule LubricationGeneral Front Wheel Bearings Wheel and Deck ZerksFront Wheel Mount Deck SpindlesTransaxle Transmission Fluid Change Troubleshooting Guide Problem CauseTroubleshooting Guide Storage ServiceWinter Storage Wiring Diagram Hex Head Cap Screws Technical DataTorque Specifications Standard HardwareMZ6128 EngineConformity Certificates USA requirementsAction Service JournalDelivery Service Stamp, signAfter 10 hours Date, mtr reading Stamp, signDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 523327 Rev a 2012-09-15