Husqvarna MZ6128/966613103 warranty Running

Page 30

OPERATION

Running

1.Release the parking brake by moving the lever downward.

NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

2.Move the steering controls inwards, out of the neutral position (N).

8058-182

Parking brake

3.Release foot pedal latch and lower deck to set cutting height.

WARNING!

Make sure that no one is near mower when engaging blade switch.

Make sure the work area is free from objects that could be thrown by the rotating blades.

8058-223

Cutting height selection

4. Move throttle control to full throttle (rabbit symbol).

5. Engage the mower deck by pulling out the blade switch.

8058-216

Move the throttle to FULL and engage the mower deck

30

Image 30

Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxWhole body Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Hour Meter Choke ControlTracking Knob Blade Switch Ignition SwitchParking Brake Fuses Cutting Height Adjuster Seat Adjustment LeverFuel Shut Off Valve Fuel Tank Hydro Release LeversOperation TrainingSteering Before Starting Starting the Engine Open the fuel tank valve Press in and turn the ignition key to the start position Weak Battery To remove cables, reverse orderRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Maintenance Maintenance ScheduleMaintenance Battery Replacing batterySafety System Tire PressuresDeck Belt Installation Deck BeltDeck Belt Removal Belts Belt InstallationPump Belt Replacing Pump BeltCutting Blades Adjusting the Mower Deck Leveling deckAnti-scalp rollers Caster Wheels CleaningUse protective glasses when cleaning and washing HardwareLubrication Lubrication ScheduleGeneral Front Wheel Bearings Wheel and Deck ZerksFront Wheel Mount Deck SpindlesTransaxle Transmission Fluid Change Troubleshooting Guide Problem CauseTroubleshooting Guide Service StorageWinter Storage Wiring Diagram Hex Head Cap Screws Technical DataTorque Specifications Standard HardwareMZ6128 EngineConformity Certificates USA requirementsAction Service JournalDelivery Service Stamp, signAfter 10 hours Date, mtr reading Stamp, signDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 523327 Rev a 2012-09-15