Husqvarna MZ6128/966613103 warranty Weak Battery, To remove cables, reverse order

Page 29

OPERATION

Weak Battery

If the battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance

section.)

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

IMPORTANT INFORMATION

The mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use the mower to start other vehicles.

Jumper Cables Use

 

1. Connect each end of the RED cable to the

 

POSITIVE (+) terminal on each battery, taking

8011-642

care not to short against chassis.

Jumper cable connection

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

3.Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.

To remove cables, reverse order

4.Remove BLACK cable first from chassis and then from the fully charged battery.

5.Remove RED cable last from both batteries.

29

Image 29
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsWhole body General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Tracking Knob Hour MeterChoke Control Parking Brake Blade SwitchIgnition Switch Fuses Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Hydro Release Levers Fuel TankSteering OperationTraining Before Starting Starting the Engine Open the fuel tank valve Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Maintenance Schedule MaintenanceMaintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Removal Deck Belt InstallationDeck Belt Pump Belt Belt InstallationBelts Replacing Pump BeltCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Use protective glasses when cleaning and washing CleaningCaster Wheels HardwareGeneral LubricationLubrication Schedule Front Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindlesTransaxle Transmission Fluid Change Problem Cause Troubleshooting GuideTroubleshooting Guide Winter Storage ServiceStorage Wiring Diagram Torque Specifications Technical DataHex Head Cap Screws Standard HardwareEngine MZ6128USA requirements Conformity CertificatesDelivery Service Service JournalAction Stamp, signDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 523327 Rev a 2012-09-15