Husqvarna LZF5227, LZF6127 manual Blade switch, Ignition Switch, Fuses

Page 21

CONTROLS

Blade switch

To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully.

8011-510

Blade Switch

Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

WARNING!

Do not run the starter for more than five seconds each time. If the engine does not start, wait 10 seconds before retrying.

Fuses

The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.

There are three fuses as well as a socket for one spare fuse.

Fuse ratings and functions:

•20 A, Primary fuse.

•7.5 A, Mower deck coupling.

•7.5 A, Accessory outlet.

•Socket for spare fuse.

8011-748

Ignition Switch

8011-746

Fuses

English-21

Image 21

Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer responsibilities TransportSpark Arresters Roll over Protection system RopsControls Motion Control Levers Hour meter Tracking knobParking Brake Blade switch Ignition SwitchFuses Refueling Seat adjustment lever Seat LockFuel shut off valve Choke control Throttle controlLifting Lever for the Mower Deck Cutting height lift pedal Pump release valvesMulching Operation TrainingSteering Roll bar and safety belt Before StartingStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing To start an engine with a weak battery To attach jumper cablesTo remove cables, reverse order Running Mower deck’s gauge wheels should be evenly adjustedOperating on hills Mowing Tips Moving by Hand Stopping the EngineLeast Hours Once Maintenance Before After Each Daily Weekly25 50 100 100 300 Battery To clean battery and terminalsReplacing battery Ignition System Safety SystemSafety system Engine Cooling Air Intake Throttle CableChoke Cable Air Filter Housing And Filter Air FilterDust Cap Engine Oil Cooler Fuel Pump Air Filter Fuel FilterBelts Deck beltTo replace deck belt Tire Pressures Pump BeltBlades Blade replacementAdjusting the Mower Deck Adjusting Cutting HeightLeveling Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareLubrication Schedule LubricationLubricating the Cables Shaft Bushings and LinkageLubricating with Lubrication Schedule Engine Oil Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsSteering Control Shafts Mower Deck StrutsChanging the Oil Filter Problem Cause Troubleshooting guideEnglish-58 Service StorageWinter Storage Wiring Diagrams Technical Data LZF5227 LZF6127 EngineTransmission Overall Dimensions LZF5227 LZF6127Productivity Torque Specifications AccessoriesCE requirements USA requirementsService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74 Page 04/01/08