Husqvarna LZF5227, LZF6127 manual Stopping the Engine, Moving by Hand

Page 35

OPERATION

Stopping the Engine

Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. Avoid idling the engine for longer periods, as there is a risk of the spark plugs fouling.

1.Disengage the mower deck by depressing the blade switch.

2.Raise the mower deck by pulling the lifting lever backward to the transport position.

3. When the machine is standing still, activate the parking brake by pulling the lever backward.

4.Move the throttle to the minimum position (tortoise symbol). Turn the ignition key to the stop position. Never use the choke to stop the engine.

5.Move the steering controls outward.

6.Remove the key when leaving the mower to prevent unauthorized use.

IMPORTANT INFORMATION

Leaving the ignition switch in any other position than “OFF” will cause the battery to be discharged and the hour meter to accumulate hours.

Moving by Hand

When pushing or pulling the mower with the engine turned off,the vent screws on both hydraulic pumps must be opened ¼ - ½ turn.

WARNING!

No adjustments or maintenance to be carried out unless:

the engine stopped

the ignition key removed

the parking brake activated

8011-510

Disengaging the mower deck

8011-753

Raise the mower deck

8011-507

Vent screws on the hydraulic pump

English-35

Image 35
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer responsibilities TransportSpark Arresters Roll over Protection system RopsControls Motion Control Levers Parking Brake Hour meterTracking knob Fuses Blade switchIgnition Switch Refueling Fuel shut off valve Seat adjustment leverSeat Lock Lifting Lever for the Mower Deck Choke controlThrottle control Mulching Cutting height lift pedalPump release valves Steering OperationTraining Starting the Engine Roll bar and safety beltBefore Starting Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing To remove cables, reverse order To start an engine with a weak batteryTo attach jumper cables Running Mower deck’s gauge wheels should be evenly adjustedOperating on hills Mowing Tips Moving by Hand Stopping the Engine25 50 100 Least Hours Once Maintenance Before After EachDaily Weekly 100 300 Replacing battery BatteryTo clean battery and terminals Ignition System Safety SystemSafety system Choke Cable Engine Cooling Air IntakeThrottle Cable Dust Cap Air Filter Housing And FilterAir Filter Engine Oil Cooler Fuel Pump Air Filter Fuel FilterTo replace deck belt BeltsDeck belt Tire Pressures Pump BeltBlades Blade replacementLeveling Adjusting the Mower DeckAdjusting Cutting Height Hardware Cleaning and WashingRemoval and installation of caster wheel Caster WheelsLubrication Schedule LubricationLubricating with Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsFront Wheel Bearings Mower Deck Height AdjusterThrottle and Choke Cables, Lever Bearings Front Wheel MountChanging the Oil Filter Steering Control ShaftsMower Deck Struts Problem Cause Troubleshooting guideEnglish-58 Winter Storage ServiceStorage Wiring Diagrams Transmission Technical DataLZF5227 LZF6127 Engine Productivity Overall DimensionsLZF5227 LZF6127 Torque Specifications AccessoriesCE requirements USA requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74 Page 04/01/08