Husqvarna LZF5227 manual Service Journal, Delivery Service, Action Date, mtr reading, stamp, sign

Page 65

	SERVICE JOURNAL


Action		Date, mtr reading, stamp, sign

Delivery Service
1.	Charge the battery.
2.	Adjust the tire pressure of all wheels to 15 PSI (1 bar).
3.	Mount the steering controls in the normal position.
4.	Connect the contact box to the cable for the seat’s
	safety switch.
5.	Check that the right amount of oil is in the engine.
6.	Adjust the position of the steering controls.
7.	Fill with fuel and open the fuel shut off valve.

8.Start the engine.

9.Check that there is drive to both wheels.

10.Check the mower deck adjustment.

11.Check:

The safety switch for the parking brake. The safety switch for the mower deck. The safety switch in the seat.

	The safety switch in the steering controls.
	Parking brake functionality.
	Driving forward.
	Driving backward.
	Engaging the blades.
12.	Check the idle speed
13.	Check the engine high idle speed
14.	Inform the customer about:	Delivery service has been carried out.
	The need and advantages of following the service schedule.	Delivery service has been carried out.
	The need and advantages of following the service schedule.	No remaining notes.
	The need and advantages of leaving the machine	No remaining notes.
	The need and advantages of leaving the machine	Certified:
	for service every 300 hours.	Certified:
	for service every 300 hours.
	The effects of service and maintaining a service journal on
	the machine’s resale value.
	Application areas for Mulching.
15.	Fill in the sales papers, etc.

English-65

Image 65

Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer responsibilities TransportSpark Arresters Roll over Protection system RopsControls Motion Control Levers Parking Brake Hour meterTracking knob Fuses Blade switchIgnition Switch Refueling Fuel shut off valve Seat adjustment leverSeat Lock Lifting Lever for the Mower Deck Choke controlThrottle control Mulching Cutting height lift pedalPump release valves Steering OperationTraining Starting the Engine Roll bar and safety beltBefore Starting Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing To remove cables, reverse order To start an engine with a weak batteryTo attach jumper cables Running Mower deck’s gauge wheels should be evenly adjustedOperating on hills Mowing Tips Moving by Hand Stopping the Engine25 50 100 Least Hours Once Maintenance Before After EachDaily Weekly 100 300 Replacing battery BatteryTo clean battery and terminals Ignition System Safety SystemSafety system Choke Cable Engine Cooling Air IntakeThrottle Cable Dust Cap Air Filter Housing And FilterAir Filter Engine Oil Cooler Fuel Pump Air Filter Fuel FilterTo replace deck belt BeltsDeck belt Tire Pressures Pump BeltBlades Blade replacementLeveling Adjusting the Mower DeckAdjusting Cutting Height Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareLubrication Schedule LubricationLubricating with Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsChanging the Oil Filter Steering Control ShaftsMower Deck Struts Problem Cause Troubleshooting guideEnglish-58 Winter Storage ServiceStorage Wiring Diagrams Transmission Technical DataLZF5227 LZF6127 Engine Productivity Overall DimensionsLZF5227 LZF6127 Torque Specifications AccessoriesCE requirements USA requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74 Page 04/01/08