Husqvarna LZF5227, LZF6127 manual Cleaning and Washing, Caster Wheels, Hardware

Page 49

maintenance

Cleaning and Washing

Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is cooled), before the dirt sticks.

Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regularly clean deck and underside of the deck with normal water pressure. Do not use a high pressure washer or steam cleaner. Avoid spraying engine and electrical components with water.

Do not rinse hot surfaces with cold water. Let unit cool before washing.

Use protective glasses when cleaning and washing.

8050-092

Cleaning

Caster Wheels

Check every 200 hours. Check that wheels rotate freely. If not, take the unit to your dealer for service.

Foam filled tires or solid tires will void the warranty.

Removal and installation of caster wheel

Remove nut and caster bolt.

Pull the wheel out of the fork and take care of the sleeve.

Install in reverse order. Tighten caster bolt.

IMPORTANT INFORMATION

DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures.

Only use O.E.M. specified tires.

Hardware

Check daily. Inspect the entire machine for loose or missing hardware.

1

8011-619

1.Caster bolt Caster wheel

English-49

Image 49
Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer responsibilities TransportSpark Arresters Roll over Protection system RopsControls Motion Control Levers Tracking knob Hour meterParking Brake Ignition Switch Blade switchFuses Refueling Seat Lock Seat adjustment leverFuel shut off valve Throttle control Choke controlLifting Lever for the Mower Deck Pump release valves Cutting height lift pedalMulching Training OperationSteering Before Starting Roll bar and safety beltStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing To attach jumper cables To start an engine with a weak batteryTo remove cables, reverse order Running Mower deck’s gauge wheels should be evenly adjustedOperating on hills Mowing Tips Moving by Hand Stopping the EngineDaily Weekly Least Hours Once Maintenance Before After Each25 50 100 100 300 To clean battery and terminals BatteryReplacing battery Ignition System Safety SystemSafety system Throttle Cable Engine Cooling Air IntakeChoke Cable Air Filter Air Filter Housing And FilterDust Cap Engine Oil Cooler Fuel Pump Air Filter Fuel FilterDeck belt BeltsTo replace deck belt Tire Pressures Pump BeltBlades Blade replacementAdjusting Cutting Height Adjusting the Mower DeckLeveling Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareLubrication Schedule LubricationShaft Bushings and Linkage Lubricating the CablesLubricating with Lubrication Schedule Engine Oil Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsMower Deck Struts Steering Control ShaftsChanging the Oil Filter Problem Cause Troubleshooting guideEnglish-58 Storage ServiceWinter Storage Wiring Diagrams LZF5227 LZF6127 Engine Technical DataTransmission LZF5227 LZF6127 Overall DimensionsProductivity Torque Specifications AccessoriesCE requirements USA requirementsDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74 Page 04/01/08