Husqvarna LZF5227, LZF6127 manual Cutting height lift pedal, Pump release valves, Mulching

Page 25

CONTROLS

Cutting height lift pedal

On some models, there is a deck assist lift pedal to aid in maneuvering the deck lift.

IMPORTANT INFORMATION

In order to obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar).

8011-465

Lift pedal

Pump release valves

IMPORTANT INFORMATION

Only rotate the valve ¼ to ½ turn to release the system.

Tighten the valve moderately.

Do not overtighten the valve when closing. Overtightening can damage the valve seat.

Pump release valves are located on the pumps. These valves release the system so the machine may be moved by hand when not running. Tilt the seat forward to gain access to the valves. Use a 5/8" wrench to open the valve.

Mulching

For mulching, there is a BioClip attachment available. The BioClip is mounted underneath the mower deck and includes control plates and BioClip blades.

8011-507

Pump release valve

8011-566

BioClip attachment

English-25

Image 25

Contents Operator Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Customer responsibilities TransportSpark Arresters Roll over Protection system RopsControls Motion Control Levers Tracking knob Hour meterParking Brake Ignition Switch Blade switchFuses Refueling Seat Lock Seat adjustment leverFuel shut off valve Throttle control Choke controlLifting Lever for the Mower Deck Pump release valves Cutting height lift pedalMulching Training OperationSteering Before Starting Roll bar and safety beltStarting the Engine Depress the control for disengaging the mower deck Press in and turn the ignition key to the start position Mowing To attach jumper cables To start an engine with a weak batteryTo remove cables, reverse order Running Mower deck’s gauge wheels should be evenly adjustedOperating on hills Mowing Tips Moving by Hand Stopping the EngineDaily Weekly Least Hours Once Maintenance Before After Each25 50 100 100 300 To clean battery and terminals BatteryReplacing battery Ignition System Safety SystemSafety system Throttle Cable Engine Cooling Air IntakeChoke Cable Air Filter Air Filter Housing And FilterDust Cap Engine Oil Cooler Fuel Pump Air Filter Fuel FilterDeck belt BeltsTo replace deck belt Tire Pressures Pump BeltBlades Blade replacementAdjusting Cutting Height Adjusting the Mower DeckLeveling Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareLubrication Schedule LubricationShaft Bushings and Linkage Lubricating the CablesLubricating with Lubrication Schedule Engine Oil Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsThrottle and Choke Cables, Lever Bearings Mower Deck Height AdjusterFront Wheel Mount Front Wheel BearingsMower Deck Struts Steering Control ShaftsChanging the Oil Filter Problem Cause Troubleshooting guideEnglish-58 Storage ServiceWinter Storage Wiring Diagrams LZF5227 LZF6127 Engine Technical DataTransmission LZF5227 LZF6127 Overall DimensionsProductivity Torque Specifications AccessoriesCE requirements USA requirementsDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year English-72 English-73 English-74 Page 04/01/08