Husqvarna LT126 To service engine, Wartung des Motors, Pour assurer lentretien du moteur

Page 45

2463 0

1

2

 

To service engine

See engine manual.

Oil drain valve

Remove cap and install drain tube.

To open valve, push in slightly, turn counterclockwise and pull out.

To close valve, push in and turn clockwise.

Remove drain tube and install cap.

1.Cap

2.Drain Tube

Wartung des Motors

Im Handbuch des Motors nachschlagen

Ventil für den Ölablauf

Den Deckel abnehmen und den Ablaufschlauch hinein- stecken.

Zum Öffnen des Ventils, dieses leicht hinunter drücken, gegen den Uhrzeigersinn drehen und herausziehen.

Um das Ventil zu schliessen, dieses hinein drücken und im Uhrzeigersinn drehen

Den Ablaufschlauch herausziehen und den Deckel wieder aufsetzen.

1.Deckel

2.Ablaufschlauch

6

Pour assurer l'entretien du moteur

Se référer au manuel d'utilisation du moteur.

Vidange de l'huile du moteur

Retirer le bouchon (1) et placer le tuyau de vidange (2).

Pour ouvrir la soupape de vidange, repousser légèrement la soupape en la faisant tourner dans le sens contraire des aiguilles d'une montre pour sortir du cran, puis tirer sur la soupape pour libérer l'huile.

Pour refermer la soupape de vidange, repousser la soupape et la faire tourner légèrement dans le sens des aiguilles d'une montre jusqu'au verrouillage du cran et relâcher la soupape.

Retirer le tuyau de vidange et replacer le bouchon.

1.Bouchon

2.Tuyau de vidange

Mantenimiento del motor

Vea el manual del motor.

Válvula de purga del aceite

Remover la caperuza e instalar el tubo de purga.

Para abrir la válvula, apretar ligeramente, girar en el sen- tido contrario al de las agujas del reloj y desenganchar.

Para cerrar la válvula, apretar y girar en el sentido de las agujas del reloj.

Remover el tubo de purga e instalar la caperuza.

1.Caperuza

2.Tubo de purga

Manutenzione del motore

Fare riferimento al manuale del motore.

Valvola di scarico dell’olio

Rimuovere il tappo ed inserire il tubo di scarico.

Per aprire la valvola, premere leggermente, ruotare in senso antiorario ed estrarre.

Per chiudere la valvola, premere e ruotare in senso orario.

Rimuovere il tubo di scarico e riposizionare il tappo.

1.Tappo

2.Tubo di scarico

Voor het onderhoud van de motor

Zie motor handleiding

Olie aflaatklep

Neem het kapje weg en breng de aflaatbuis aan.

Om de klep te openen druk lichtjes in, draai om tegen wijzerzin en trek uit.

Om de klep te sluiten, druk in en draai om in wijzerzin.

Verwijder de aflaatbuis en breng het kapje aan.

1.Kapje

2.Aflaatbuis

45

Image 45
Contents LT126 Page Training Safety RulesII. Preparation III. OperationIV. Maintenance and Storage Schulung SicherheitsvorschriftenII. Vorbereitung III. BetriebIV. Wartung UND Lagerung Précautions D’UTILISATION Règles de SécuritéII. Préparation III. UtilisationIV. Entretien ET Entreposage Instrucción Reglas De SeguridadII. Preparación III. OperaciónIV. Mantenimiento Y Almacenamiento Addestramento ALL’USO Norme AntinfortunisticheII. Preparazione III. FunzionamentoIV. Manutenzione E Periodi DI INATTIVITA’ II. Voorbereiding VeiligheidsregelsIII. Bediening Maai alleen bij daglicht of goed kunstlicht12,5/9,3 IV. Onderhoud EN Opslag190 As rated by the engine manufacturerReverse Neutral LEA EL Manual DE Explosive Gase SER Ausspülen Züglich MIT WASSofort Ärztliche Hilfe AufsuchenVolante DE Dirección Volant DE DirectionSteering Wheel LenkradAdjust Seat Install SeatSitz Montieren Einstellen DES SitzesInstallatie VAN DE Stoel Installazione DEL SedileInstalación DEL Asiento Ajustar EL AsientoInstallazione Della Batteria Install Battery Einbau DER BatterieAccu Installeren Mise EN Place DE LA Batterie02604 Anordnung der Bedienungseinrichtungen Positioning of controlsEmplacement des commandes ComandiUbicación de los mandos De plaats van de bedieningsorganen Gas-und kaltstarthebel Commande des gaz et starterMandos del acelerador y del estrangulador Comando gas/chokeKupplungs-/Bremspedal Clutch/Brake PedalPédale de frein/D’embrayage Pedal del embrague/FrenoPalanca de cambios Commande de la boîte de vitessesGear shift lever SchalthebelConnection/disconnection of the cutting unit Commande dembrayage et de débrayage du carter de coupeAcoplamiento y desacoplamiento del equipo de corte Inserimento/disinserimento del dispositivo di taglioZündschloß Ignition LockClé de contact et de démarrage Cerradura de encendidoFeststellbremse Parking brakeFrein de stationnement Freno de estacionamientoReposición de combustible Filling upTanken Plein de carburantÖlstand Oil levelNiveau d’huile Nivel de aceiteDriving . Betrieb . Conduite . Conducción Guida . Rijden Hinweis RemarqueNota Betrieb DrivingConduite ConducciónRückwärtsgangsystem ROS Reverse Operation System ROSSécurité Marche Arrière ROS Sistema de Funcionamiento Atrás ROSSysteem Voor Achteruit ROS Sistema per operazioni in retromarcia ROSCutting tips Ratschläge zum RasenmähenConsejos para el corte Conseils pour la tonteConsigli per il taglio dell’erba MaaitipsAdvertencia WarnungPericolo WaarschuwingPage Abschalten des Motors Switching off the engineExtinction du moteur Apagar el motorAdvertencia Motorhaube Engine hoodCapot moteur Cubierta del motorWartung MaintenanceEntretien MantenimientoWartung des Motors To service enginePour assurer lentretien du moteur Mantenimiento del motorWartungsnachweis Service RecordInforme DE Servicio Schema DentretienDati DI Servizio Service AantekeningenFahrer-Anwesenheitssystem und Rückwärts- gangsystem ROS Operator Presence System and Reverse Opera- tion System ROSControl Sistema DE Funcionamiento Atrás ROS Control Sistema Presencia OperadorControllo DEL Sistema DI Presenza Operatore Controllo DEL Sistema PER Operazioni in RE- Tromarcia ROSBlades MesserbalkenLames Cuchillas LameMessen Überprüfen der Bremse To Check BrakePour vérifier le frein Controlar el FrenoTo Remove Mower PL QEntfernen Des Mähers Pour Démonter La FaucheusePL QD Austauschen des Antriebsriemens des Mähers To Replace Mower Drive BeltSustituir la correa de transmisión cortacésped Pour remplacer la courroie de transmissionDe aandrijfriem van de maaiunit vervangen Sostituzione della cinghia di trasmissione del rasaerbaVisual SIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentPrecision SIDE-TO-SIDE Adjustment To Level MowerVisuelle Justierung AN Beiden Seiten Ausnivellieren des MähersGenaue justierung an beiden seiten Gleich sindRéglage Visuel Bilatéral Pour mettre la tondeuse à niveauRéglage Bilatéral DE Précision Réglage D’AVANT EN ArrièreAjuste Visual DE Lado a Lado Nivelar el cortacéspedAjuste DE Precisión DE Lado a Lado Ajuste DE LA Parte Delantera a LA TraseraRegolazione Visiva LATO-LATO Livellamento del rasaerbaRegolazione DI Precisione LATO-LATO Regolazione DAVANTI-DIETROBeide Kanten OP HET OOG Uitlijnen De maaiunit nivellerenPRECISIE-AFSTELLING BAN Beide Kanten BAN DE Maaiunit Afstelling BOOR-EN AchterzijdeEinstellung DES Schalthebels DES Differentialgetriebes Transaxle Gear Shift Lever Neutral AdjustmentPage Remplacement de la courroie dentraînement Replacement of drive beltAuswechsein des Treibriemens Cambio de correa propulsoraTroubleshooting . Störungssuche Recherche des pannes . Búsqueda de averías Ricerca guasti . Het localiseren van fouten Storage . Aufbewahrung . Remisage . Conservación ServiceEntretien et réparations ServicioServizio Rismessaggio . Stallen532 42 24-61 12.10.08 BAD

LT126 specifications

The Husqvarna LT126 is a standout model within the compact lawn tractor market, known for its robust construction, user-friendly design, and versatile features. It is primarily designed for homeowners looking for an efficient and reliable solution for maintaining their lawns. Built with a focus on comfort and ease of use, the LT126 boasts a number of characteristics that enhance both performance and user experience.

One of the key features of the LT126 is its powerful engine. Equipped with a reliable 547cc Briggs & Stratton engine, this tractor ensures efficient performance while providing ample power for routine mowing tasks. The engine is designed with easy starting features and efficient fuel consumption, making it an ideal choice for any yard size.

The LT126 features a 42-inch cutting deck, which enables quick and efficient mowing. This cutting deck is designed with specified cutting heights, allowing users to adjust it according to their lawn's needs. With a simple lever mechanism, users can easily customize their mowing height for a clean, even cut.

Maneuverability is another highlight of the Husqvarna LT126. The tractor is equipped with a tight turning radius, which facilitates easy navigation around obstacles like flower beds and trees. Additionally, the hydrostatic transmission allows for smooth speed adjustments, enabling users to maintain controlled and confident operation even in tight spaces.

Comfort is paramount in the Husqvarna LT126 design. The high back seat provides good back support, allowing users to tackle mowing tasks for extended periods without discomfort. The ergonomically designed steering wheel and pedals ensure that operators can easily maintain control, making the tractor accessible to a wide range of users.

Furthermore, the Husqvarna LT126 integrates advanced technologies, such as the easy-to-use dashboard that provides real-time information about fuel levels, cutting height, and service reminders. This feature ensures that users are constantly informed about their tractor’s performance, contributing to overall maintenance and efficiency.

The model also supports optional attachments, such as mulching kits, baggers, and snow blades, making it a versatile tool for year-round yard care. This adaptability allows homeowners to maximize their investment by utilizing the tractor beyond traditional mowing.

In summary, the Husqvarna LT126 is a powerful and versatile lawn tractor that combines efficiency, comfort, and advanced technology. With its emphasis on user-friendly features and adaptability, it stands out as an essential tool for maintaining a beautiful lawn, making it an excellent choice for both novice and experienced lawn care enthusiasts.