Husqvarna 2042 LS (CA) manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 25

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Image 25
Contents LS CA Page Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor To SET Parking BRAKESee Fig HOW to USE Your TractorStopping See Fig To USE Throttle Control D See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Move Forward and Backward See Fig To USE Cruise Control J See FigReverse Operation System ROS Using the Reverse Operation SystemTo Operate on Hills To Transport See FigsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsLubrication Chart MaintenanceBrake Operation TractorTires Blade CareEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Service and Adjustments To Level Mower To Replace Motion Drive Belt See Fig To Replace Mower Drive Belt See FigTo Check Brake To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points Engine dies when SCH12 SchematicElectrical KEY Part Description Chassis Tractor - Model Number 2042LS 96043004800, Product no 43 Drive Tractor - Model Number 2042LS 96043004800, Product no 43 Engine Spark Arrester KIT28 90 Engine Power Rating Information Steering Assembly 532 41 Wheel, Steering 532 18 532 40 Seat Seat AssemblyWheels and Tires Decals116 190 145118 188 189 6188Mower Deck 100 Mower LiftSuggested Guide for Sighting Slopes for Safe Operation 532 41 88-19 12-12-07 SBW Warranty Statement

2042 LS (CA) specifications

The Husqvarna 2042 LS (CA) is a lawnmower designed for both efficiency and user convenience, making it an ideal choice for homeowners looking to maintain a pristine lawn. This model combines powerful performance with innovative technology, ensuring a superior mowing experience.

One of the standout features of the Husqvarna 2042 LS is its impressive cutting deck. With a 42-inch cutting width, it allows for the swift trimming of lawns while maintaining the ability to navigate various terrains with ease. The cutting deck is designed for optimal airflow, enhancing grass clipping distribution for a neater finish. The mower also comes equipped with a robust steel chassis that promotes durability and longevity.

Powering the Husqvarna 2042 LS is a reliable and potent engine, providing the necessary torque to tackle different grass types and terrain obstacles. This ensures that the mower can effortlessly handle thicker grass without stalling, catering to diverse lawn conditions. The intuitive starting system allows for easy ignition, so users can quickly get to work without frustration.

Another notable characteristic is the advanced cutting height adjustment system. This feature allows users to easily select their preferred cutting height, enhancing flexibility for different seasons or grass types. Whether one wants a short trim during the summer or a slightly longer cut in the spring, the 2042 LS accommodates these needs with multiple height settings.

User comfort is prioritized with the ergonomic design of the mower. The handles are adjustable and designed to reduce fatigue during extended use. Additionally, the tractor-style layout provides better visibility, ensuring that users can easily monitor their mowing path.

The Husqvarna 2042 LS stands out due to its commitment to technology as well. The mower incorporates features such as a dashboard display that provides important information like fuel levels and service reminders, ensuring that users are always informed about machine performance.

Fuel efficiency is another hallmark of this lawnmower, minimizing trips to the gas station and maximizing cutting time. Combined with low emissions, the Husqvarna 2042 LS (CA) is an environmentally friendly option.

In conclusion, the Husqvarna 2042 LS (CA) is a powerful, versatile lawnmower that combines efficiency, user-friendly features, and innovative technology. Its durable design, advanced cutting systems, and comfort-oriented attributes make it an excellent investment for any homeowner looking to enhance their lawn care experience.