Getting Started with Your Notebook

Setting Up Your Notebook

WARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located

on the Web site at http://www.compaq.com/ergo and on the hard drive or on the Documentation Library CD that is included with

the product.

When you set up your notebook for the first time, you will connect the AC adapter, charge the battery pack, turn on the notebook, and run the Windows setup program.

Step 1: Insert the Battery Pack

WARNING: Do not mutilate or puncture battery packs. Do not dispose of battery packs in fire, or they can burst or explode, releasing hazardous chemicals. Rechargeable battery packs must be recycled or disposed of properly.

To install the battery pack:

1.Turn the notebook upside down.

2.Insert the connector end of the battery pack into the battery pack compartment, then slide the battery pack in until it latches.

Startup Guide

1–11

Page 19
Image 19
Compaq 319921-001 manual Setting Up Your Notebook, Insert the Battery Pack