Husqvarna Z5426, Z4824, Z4219, Z4218 manual Maintenance

Page 13

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

English-11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator´s manual Page OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsControl Locations Tracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchChoke Control Ignition SwitchThrottle Control Parking Brake Hour MeterMachine must be stopped before activating the parking brake Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual  = Not described in this manual To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableBriggs and Stratton engine Replacing the Air FilterReplacing the Fuel Filter Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakeDeck belt Checking the V-beltsDeck belt installation To replace EZT E-Series Zeroturn Transaxle belt EZT beltEZT belt removal Check the blades Checking the BladesAdjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication LubricationLubrication Schedule Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesCaster wheels Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Changing the Oil Filter Checking the oil levelTransmission Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring diagram Wiring DiagramsTechnical DataTechnical Data Technical DataZ4218 Z4219 Equipment Z4824 Z5426 English-64 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 At Least Once Each Year English-74 English-75 English-76 Page 113926Rir06/05/06

Z5426, Z4219, Z4218, Z4824 specifications

Husqvarna has established itself as a leader in the outdoor power equipment industry, renowned for its innovative technology and durable machinery. Among its diverse range of zero-turn mowers, the Husqvarna Z4824, Z4218, Z4219, and Z5426 stand out for their unique features and capabilities, offering exceptional performance for both residential and commercial applications.

The Husqvarna Z4824 is a robust zero-turn mower designed for serious lawn care enthusiasts. With its powerful 24 HP engine, it delivers outstanding cutting performance and fuel efficiency. One of its standout features is its 48-inch cutting deck, which allows for a wider mowing path, enhancing productivity. The innovative Air Induction Mowing Technology improves grass lift and delivers a clean, even cut. Its ergonomic control system provides easy maneuverability, making it ideal for navigating around obstacles in the yard.

Next, the Husqvarna Z4218 is tailored for homeowners seeking a balance of power and agility. Powered by an 18 HP engine, the Z4218 features a 42-inch cutting deck, perfect for smaller to medium-sized lawns. This model incorporates a user-friendly instrument panel that provides quick access to controls, enhancing the mowing experience. Its compact design allows for easy access in tight spaces while still providing the speed and efficiency that Husqvarna mowers are known for.

The Husqvarna Z4219 builds on the foundation of the Z4218 with improved features. It comes equipped with a robust 19 HP engine and features a similar 42-inch cutting deck, making it suitable for various lawn conditions. This model introduces a heavy-duty transmission that offers improved performance and durability. The Z4219 also emphasizes comfort, with a high back seat that reduces operator fatigue during extended mowing sessions.

On the higher end, the Husqvarna Z5426 is designed for landscape professionals and serious homeowners. This model boasts a powerful 26 HP engine paired with a 54-inch cutting deck, enabling it to tackle larger areas efficiently. The commercial-grade construction promises longevity and resilience, making it suitable for frequent use. Advanced features like an adjustable cutting height and a large fuel tank enhance productivity, while the exceptional turning radius allows for agile navigation around tight corners.

Collectively, these Husqvarna zero-turn mowers embody power, precision, and comfort. Each model is built with cutting-edge technology and designed for maximum efficiency, catering to various mowing needs and preferences. Whether for residential or commercial use, these mowers deliver exceptional value and performance, solidifying Husqvarna's reputation in the outdoor equipment industry.
Top Page Image Contents