Husqvarna Z4219, Z4824, Z5426, Z4218 manual Operation, Training

Page 26

OPERATION

Operation

Read "Safety Instructions" section and following pages, if you are unfamiliar with the machine.

Training

Zero turn mowers are far more manueverable than typical riding mowers due to their unique steering capabilities.

We suggest when first operating the mower, use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during initial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to ZeroTurn mowers to become familiar with the mowers movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to over aggressive maneuvers.

To move forward and backward

The direction and speed of the mowers movements is effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

IMPORTANT INFORMATION

When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.

First time users should push mower (see "Moving by Hand" in the "Operation" section) to an open, flat area, without other people or vehicles/obstacles near by. In order to move unit under its own power, the operator must be in the seat, start engine (see "Before Starting" in "Operation" section), adjust engine speed to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. As long as the control levers have not been moved forward or backwards, mower will not move. Slowly move both control levers forward slightly, this will allow mower to start moving forward in a straight line. Pull back on control levers to the neutral position and mower should stop moving. Pull back slightly on control levers, this will allow mower to start moving backwards. Push forward on control levers to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically. Then by alternating one lever slightly to the forward position and the other in the reverse position.

English-24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operator´s manual Page Contents OPERATOR’S Manual Rider SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxx xxxxxx Symbols and DecalsSymbols and Decals Objects Engine is Running Moving sharp blades under cover General Operation Safety InstructionsSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Control Locations ControlsControls Motion Control Levers TrackingSeat adjustment knobs FusesBy pass linkages Blade switch RefuelingThrottle Control Ignition SwitchChoke Control Machine must be stopped before activating the parking brake Hour MeterParking Brake Accessories Cutting height pedalTraining OperationOperation Before Starting Starting the EngineDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance = Described in this manual  = Not described in this manual Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting Throttle Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Briggs and Stratton engineChecking Tire Pressures Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation EZT belt removal EZT beltTo replace EZT E-Series Zeroturn Transaxle belt Checking the Blades Check the bladesAdjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing HardwareLubrication Schedule LubricationLubrication Caster wheels Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Checking the oil level Changing the Oil FilterTransmission Problem Cause Trouble Shooting GuideTrouble Shooting Guide Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramZ4218 Z4219 Technical DataTechnical DataTechnical Data Equipment Z4824 Z5426 English-64 Torque Specifications USA requirements Conformity CertificatesConformity Certificates Delivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 At Least Once Each Year English-74 English-75 English-76 Page 113926Rir06/05/06

Z5426, Z4219, Z4218, Z4824 specifications

Husqvarna has established itself as a leader in the outdoor power equipment industry, renowned for its innovative technology and durable machinery. Among its diverse range of zero-turn mowers, the Husqvarna Z4824, Z4218, Z4219, and Z5426 stand out for their unique features and capabilities, offering exceptional performance for both residential and commercial applications.

The Husqvarna Z4824 is a robust zero-turn mower designed for serious lawn care enthusiasts. With its powerful 24 HP engine, it delivers outstanding cutting performance and fuel efficiency. One of its standout features is its 48-inch cutting deck, which allows for a wider mowing path, enhancing productivity. The innovative Air Induction Mowing Technology improves grass lift and delivers a clean, even cut. Its ergonomic control system provides easy maneuverability, making it ideal for navigating around obstacles in the yard.

Next, the Husqvarna Z4218 is tailored for homeowners seeking a balance of power and agility. Powered by an 18 HP engine, the Z4218 features a 42-inch cutting deck, perfect for smaller to medium-sized lawns. This model incorporates a user-friendly instrument panel that provides quick access to controls, enhancing the mowing experience. Its compact design allows for easy access in tight spaces while still providing the speed and efficiency that Husqvarna mowers are known for.

The Husqvarna Z4219 builds on the foundation of the Z4218 with improved features. It comes equipped with a robust 19 HP engine and features a similar 42-inch cutting deck, making it suitable for various lawn conditions. This model introduces a heavy-duty transmission that offers improved performance and durability. The Z4219 also emphasizes comfort, with a high back seat that reduces operator fatigue during extended mowing sessions.

On the higher end, the Husqvarna Z5426 is designed for landscape professionals and serious homeowners. This model boasts a powerful 26 HP engine paired with a 54-inch cutting deck, enabling it to tackle larger areas efficiently. The commercial-grade construction promises longevity and resilience, making it suitable for frequent use. Advanced features like an adjustable cutting height and a large fuel tank enhance productivity, while the exceptional turning radius allows for agile navigation around tight corners.

Collectively, these Husqvarna zero-turn mowers embody power, precision, and comfort. Each model is built with cutting-edge technology and designed for maximum efficiency, catering to various mowing needs and preferences. Whether for residential or commercial use, these mowers deliver exceptional value and performance, solidifying Husqvarna's reputation in the outdoor equipment industry.
Top Page Image Contents