Husqvarna Z4219, Z4824, Z5426, Z4218 Battery, To clean battery and terminals, Replacing battery

Page 38

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Recharge at 6-10 amperes for 1 hour

To clean battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift Seat and rotate forward.

2.Open terminal access doors.

3.Using two 1/2" wrenches disconnect BLACK battery cable then RED battery cable.

4.Using 7/16" wrench, remove terminal guard.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall terminal guard.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Tighten securely.

11.Close terminal access doors.

12.Lower seat.

Always use protective glasses when handling the battery.

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

CZ-22

1.Terminal guard

2.Terminal access doors Battery installation

English-36

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator´s manual Page Contents OPERATOR’S Manual Rider SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxx xxxxxx Symbols and DecalsSymbols and Decals Objects Engine is Running Moving sharp blades under cover General Operation Safety InstructionsSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Control Locations ControlsControls Motion Control Levers TrackingSeat adjustment knobs FusesBy pass linkages Blade switch RefuelingThrottle Control Ignition SwitchChoke Control Machine must be stopped before activating the parking brake Hour MeterParking Brake Accessories Cutting height pedalTraining OperationOperation Before Starting Starting the EngineDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance = Described in this manual  = Not described in this manual Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting Throttle Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Briggs and Stratton engineChecking Tire Pressures Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation EZT belt removal EZT beltTo replace EZT E-Series Zeroturn Transaxle belt Checking the Blades Check the bladesAdjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing HardwareLubrication Schedule LubricationLubrication Caster wheels Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Checking the oil level Changing the Oil FilterTransmission Problem Cause Trouble Shooting GuideTrouble Shooting Guide Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramZ4218 Z4219 Technical DataTechnical DataTechnical Data Equipment Z4824 Z5426 English-64 Torque Specifications USA requirements Conformity CertificatesConformity Certificates Delivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 At Least Once Each Year English-74 English-75 English-76 Page 113926Rir06/05/06

Z5426, Z4219, Z4218, Z4824 specifications

Husqvarna has established itself as a leader in the outdoor power equipment industry, renowned for its innovative technology and durable machinery. Among its diverse range of zero-turn mowers, the Husqvarna Z4824, Z4218, Z4219, and Z5426 stand out for their unique features and capabilities, offering exceptional performance for both residential and commercial applications.

The Husqvarna Z4824 is a robust zero-turn mower designed for serious lawn care enthusiasts. With its powerful 24 HP engine, it delivers outstanding cutting performance and fuel efficiency. One of its standout features is its 48-inch cutting deck, which allows for a wider mowing path, enhancing productivity. The innovative Air Induction Mowing Technology improves grass lift and delivers a clean, even cut. Its ergonomic control system provides easy maneuverability, making it ideal for navigating around obstacles in the yard.

Next, the Husqvarna Z4218 is tailored for homeowners seeking a balance of power and agility. Powered by an 18 HP engine, the Z4218 features a 42-inch cutting deck, perfect for smaller to medium-sized lawns. This model incorporates a user-friendly instrument panel that provides quick access to controls, enhancing the mowing experience. Its compact design allows for easy access in tight spaces while still providing the speed and efficiency that Husqvarna mowers are known for.

The Husqvarna Z4219 builds on the foundation of the Z4218 with improved features. It comes equipped with a robust 19 HP engine and features a similar 42-inch cutting deck, making it suitable for various lawn conditions. This model introduces a heavy-duty transmission that offers improved performance and durability. The Z4219 also emphasizes comfort, with a high back seat that reduces operator fatigue during extended mowing sessions.

On the higher end, the Husqvarna Z5426 is designed for landscape professionals and serious homeowners. This model boasts a powerful 26 HP engine paired with a 54-inch cutting deck, enabling it to tackle larger areas efficiently. The commercial-grade construction promises longevity and resilience, making it suitable for frequent use. Advanced features like an adjustable cutting height and a large fuel tank enhance productivity, while the exceptional turning radius allows for agile navigation around tight corners.

Collectively, these Husqvarna zero-turn mowers embody power, precision, and comfort. Each model is built with cutting-edge technology and designed for maximum efficiency, catering to various mowing needs and preferences. Whether for residential or commercial use, these mowers deliver exceptional value and performance, solidifying Husqvarna's reputation in the outdoor equipment industry.
Top Page Image Contents