Husqvarna Fuel Filter Location and Maintenance Tips for Your Lawn Mower

Page 43

MAINTENANCE

Replacing the Fuel Filter

Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged.

Replace the filter as follows:

1.Move the hose clamps away from the

filter. Use flat-nosed pliers.

2.Pull the filter loose from the hose ends.

3. Push the new filter into the hose ends. Position the filter with the ”FLOW” arrow

8009-405

pointing up toward the carburator. IfFuel filter necessary, a soap solution can be

applied to the filter ends to ease mounting.

4.Move the hose clamps back toward the filter.

Checking Tire Pressures

All four tires should have a pressure of 15 psi / 103 kPa /1 bar.

Checking the Parking Brake

Visually check that no damage is found on the lever, linages, or switch belonging to the parking brake. Perform a stand still test and check that there is a braking action.

To adjust the parking brake, contact the Husqvarna service workshop.

WARNING!

Faulty adjustment can cause an accident.

8011-564

Tire pressures

IMPORTANT INFORMATION

The parking brake is a mechanical latch brake and must not be applied when the mower is moving.

English-41

Image 43

Contents Operator´s manual Page OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsControl Locations Tracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchChoke Control Ignition SwitchThrottle Control Parking Brake Hour MeterMachine must be stopped before activating the parking brake Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableBriggs and Stratton engine Replacing the Air FilterChecking the Parking Brake Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking Tire PressuresDeck belt Checking the V-beltsDeck belt installation To replace EZT E-Series Zeroturn Transaxle belt EZT beltEZT belt removal Check the blades Checking the BladesAdjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Hardware Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsLubrication LubricationLubrication Schedule Engine Oil Briggs & Stratton Changing the Engine Oil Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Caster wheelsOil drain valve Changing the Oil Filter Checking the oil levelTransmission Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-58 Winter Storage ServiceStorage StorageWiring diagram Wiring DiagramsTechnical DataTechnical Data Technical DataZ4218 Z4219 Equipment Z4824 Z5426 English-64 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Action Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 At Least Once Each Year English-74 English-75 English-76 Page 113926Rir06/05/06