Husqvarna iZ6123TKAA, iZ4821TSKAA, iZ4817TSKAA, iZ5223TSKAA, iZ5223TKOA manual Maintenance

Page 13

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Stop the engine. Prevent the engine from

 

 

starting by removing the spark plug

 

 

cables from the spark plugs or by

 

 

removing the ignition key before making

 

 

any adjustments or performing

 

 

maintenance.

 

Never fill the fuel tank indoors.

 

Fuel and fuel fumes are poisonous and

 

 

extremely flammable. Be especially

 

 

cautious when handling fuel, as

 

 

carelessness can result in personal

 

 

injury or fire.

 

Only store fuel in containers approved for

 

 

the purpose.

 

Never remove the fuel tank cap and

 

 

never fill the fuel tank while the engine is

8011-516

 

running.

 

Never fill the fuel tank indoors

 

 

Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames.

If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

Store the machine and fuel in such a way that there is no risk of leaking fuel or fuel vapor leading to damages.

Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

Avoid overfilling. If you spill fuel on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you have spilled fuel on your clothing, change your clothing.

Allow the machine to cool before taking any actions in the engine compartment.

Be very careful when handling battery acid. Acid on skin can cause serious corrosive burns. If you spill battery acid on your skin, rinse immediately with water.

WARNING!

The engine, the exhaust system, and the hydraulic system’s components become very warm during operation.

Risk for burns if touched.

Always use protective glasses when handling the battery.

WARNING!

The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after touching the battery.

English-11

Image 13
Contents Operator´s manual Page IZ Series OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx People Rops warning decal Safety Instructions Safety InstructionsGeneral Use Use ear protectors to avoid damage to hearing Do as follows Driving on SlopesDo not Children Maintenance Risk of sparking Transport Use protective glasses for maintenance workCustomer responsibilities Roll over Protecion system RopsControl Locations ControlsMotion Control Levers Tracking Knob Hour MeterParking Brake Ignition Switch Blade switchFuses Refueling Seat Locking DeviceFuel Shut Off Valve Seat Adjustment LeverChoke Control Lifting Lever for the Mower Deck Throttle ControlPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule MaintenanceMainte Least Hours Nance Once To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Faulty adjustment can cause an accidentChecking the Parking Brake Checking the V-beltsChecking the Blades Always use protective gloves when handling the bladesPump belt Remove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingRemoval and installation of caster wheel Caster WheelsLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-63 Storage ServiceStorage Winter StorageWiring diagrams Wiring DiagramsTechnical Data Technical DataIZ4217TSKAA IZ4817TSKAA IZ4821TKAA Productivity CV23S IZ5223TKAA IZ5223TKOA IZ6123TKAAEnglish-69 Torque Specifications USA requirements Conformity CertificatesService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110842R0108/03/05