Husqvarna iZ5223TKOA, iZ4821TSKAA manual Roll over Protecion system Rops, Customer responsibilities

Page 16

SAFETY INSTRUCTIONS

Roll over Protecion system ROPS

The ROPS increases the basic weight of the unit by 34 lbs/16kg.

ROPS for the US is standard equipment, accessory for Europe.

WARNING!

The structures capability may be imparired by structural damage if overturned, or alteration occurs. If any of these conditions take place, the total structure MUST be replaced.

Do not use ROPS as a lifting, attaching or anchoring point.

Do not use ROPS for wrecking or towing.

Do not exceed Max GVW: 2614 lbs/1188 kg.

Read machine operator´s manual before each use.

Securely fasten your seat belt if the unit has a ROPS.

Where possible, avoid operating the unit near ditches, embankments and holes.

Reduce speed when turning, crossing slopes and on rough, slick or muddy surfaces.

Stay off slopes too steep for safe operation.

Watch where you are going, especially at row ends, on roads and around trees.

Do not permit others to ride.

Operate the mower smoothly - no jerky turns, starts or stops.

When mower is stopped, set brakes securely and use park brake.

If any part of ROPS is damaged, the entire ROPS must be replaced.

Check all bolts including seat belt for correct torque before each use.

Check ROPS structure for damage before each use.

ROPS bar is NOT intended for use in sub zero temperatures

Customer responsibilities

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your mower.

Follow the instructions under "Maintenance” and "Storage” sections of this owner’s manual.

WARNING!

This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, bush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muffler is available through your authorized Husqvarna dealer.

English-14

Image 16
Contents Operator´s manual Page OPERATOR’S Manual Rider IZ SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx People Rops warning decal Safety Instructions Safety InstructionsGeneral Use Use ear protectors to avoid damage to hearing Do as follows Driving on SlopesDo not Children Maintenance Risk of sparking Use protective glasses for maintenance work TransportRoll over Protecion system Rops Customer responsibilitiesControls Control LocationsMotion Control Levers Tracking Knob Hour MeterParking Brake Ignition Switch Blade switchFuses Seat Locking Device RefuelingFuel Shut Off Valve Seat Adjustment LeverChoke Control Throttle Control Lifting Lever for the Mower DeckPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule MaintenanceMainte Least Hours Nance Once To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsChecking the Blades Always use protective gloves when handling the bladesPump belt Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Cleaning and Washing Use protective glasses when cleaning and washingRemoval and installation of caster wheel Caster WheelsLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-63 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data Technical DataIZ4217TSKAA IZ4817TSKAA IZ4821TKAA Productivity IZ5223TKAA IZ5223TKOA IZ6123TKAA CV23SEnglish-69 Torque Specifications Conformity Certificates USA requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110842R0108/03/05