Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TKAA, iZ5223TKAA, iZ5223KOA, iZ6123TKAA, iZ4821TSKAA

Page 29

OPERATION

10.When the engine starts, immediately release the ignition key back to the run position.

IMPORTANT INFORMATION

Do not run the starter for more than

5 seconds each time. If the engine does not start, wait about 10 seconds before re- trying.

8011-743

11.Press the choke control in gradually when the engine has started.

Return to run position

8011-508

Gradually press in the choke control

12.Set the desired engine speed with the throttle.

Allow the engine to run at a moderate speed, ”half throttle”, for 3-5 minutes before loading it too heavily.

USE FULL THROTTLE WHEN MOWING.

WARNING!

Never run the engine indoors, in enclosed or poorly ventilated spaces. Engine exhaust fumes contain poisonous carbon monoxide.

8011-509

Set the engine speed

English-27

Image 29

Contents Operator´s manual Page IZ Series OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionManufacturing Number Good ServiceXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Symbols and DecalsSymbols and Decals People Rops warning decal General Use Safety InstructionsSafety Instructions Use ear protectors to avoid damage to hearing Do not Driving on SlopesDo as follows Children Maintenance Risk of sparking Transport Use protective glasses for maintenance workCustomer responsibilities Roll over Protecion system RopsControl Locations ControlsMotion Control Levers Parking Brake Hour MeterTracking Knob Fuses Blade switchIgnition Switch Refueling Seat Locking DeviceChoke Control Seat Adjustment LeverFuel Shut Off Valve Lifting Lever for the Mower Deck Throttle ControlCutting height pedal AccessoriesPump release valves Training OperationOperation Starting the Engine Roll bar and safety beltBefore Starting Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule MaintenanceMainte Least Hours Nance Once Replacing battery BatteryTo clean battery and terminals Ignition System Checking the Safety System Safety system Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableChecking and Adjusting the Choke Cable Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Faulty adjustment can cause an accidentChecking the Parking Brake Checking the V-beltsPump belt Always use protective gloves when handling the bladesChecking the Blades Remove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingRemoval and installation of caster wheel Caster WheelsLubrication Schedule LubricationLubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsDeck belt pulleys Mower Deck Height AdjusterFront Wheel Bearings Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Problem Cause Trouble Shooting GuideTrouble Shooting Guide English-63 Storage ServiceStorage Winter StorageWiring diagrams Wiring DiagramsIZ4217TSKAA IZ4817TSKAA IZ4821TKAA Technical DataTechnical Data Productivity CV23S IZ5223TKAA IZ5223TKOA IZ6123TKAAEnglish-69 Torque Specifications USA requirements Conformity CertificatesService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110842R0108/03/05