Husqvarna iZ5223TSKAA, iZ4821TSKAA, iZ6123TKAA, iZ4817TSKAA, iZ5223TKOA manual Changing the Oil Filter

Page 63

LUBRICATION

14. Changing the Oil Filter

1.Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil.

2.Remove the oil filter. If necessary, use a filter remover.

3.Wipe new, clean engine oil onto the seal for the new filter.

4.Mount the filter by hand with + 3/4 turn.

5.Run the engine warm, then check that there are no leaks around the oil filter seal.

6.Check the oil level in the engine, fill to proper level if necessary. The oil filter holds 0.2 qt (0.2 liters) of oil.

8011-570

Changing the oil filter Kawasaki

8011-745

Changing the oil filter Kohler

English-61

Image 63

Contents Operator´s manual Page IZ Series OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx People Rops warning decal Safety Instructions Safety InstructionsGeneral Use Use ear protectors to avoid damage to hearing Driving on Slopes Do as followsDo not Children Maintenance Risk of sparking Transport Use protective glasses for maintenance workCustomer responsibilities Roll over Protecion system RopsControl Locations ControlsMotion Control Levers Hour Meter Tracking KnobParking Brake Blade switch Ignition SwitchFuses Refueling Seat Locking DeviceSeat Adjustment Lever Fuel Shut Off ValveChoke Control Lifting Lever for the Mower Deck Throttle ControlAccessories Pump release valvesCutting height pedal Operation OperationTraining Roll bar and safety belt Before StartingStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Maintenance ScheduleMainte Least Hours Nance Once Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Safety system Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking the V-belts Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakeAlways use protective gloves when handling the blades Checking the BladesPump belt Remove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication LubricationLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsMower Deck Height Adjuster Front Wheel BearingsDeck belt pulleys Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-63 Winter Storage ServiceStorage StorageWiring diagrams Wiring DiagramsTechnical Data Technical DataIZ4217TSKAA IZ4817TSKAA IZ4821TKAA Productivity CV23S IZ5223TKAA IZ5223TKOA IZ6123TKAAEnglish-69 Torque Specifications USA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110842R0108/03/05