Husqvarna iZ4821TSKAA To start an engine with a weak battery, To remove cables, reverse order

Page 30

OPERATION

To start an engine with a weak battery

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See “Battery” on page 36).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower battery to start other vehicles.

To attach jumper cables

• Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

8011-642

• Connect the other end of the BLACK	Jumper cables connection
cable to a good CHASSIS GROUND on
the mower with the discharged battery,
away from the fuel tank and battery.

To remove cables, reverse order

•Remove BLACK cable first from chassis and then from the fully charged battery.

•Remove RED cable last from both batteries.

English-28

Image 30

Contents Operator´s manual Page OPERATOR’S Manual Rider IZ SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx People Rops warning decal Safety Instructions Safety InstructionsGeneral Use Use ear protectors to avoid damage to hearing Driving on Slopes Do as followsDo not Children Maintenance Risk of sparking Use protective glasses for maintenance work TransportRoll over Protecion system Rops Customer responsibilitiesControls Control LocationsMotion Control Levers Hour Meter Tracking KnobParking Brake Blade switch Ignition SwitchFuses Seat Locking Device RefuelingSeat Adjustment Lever Fuel Shut Off ValveChoke Control Throttle Control Lifting Lever for the Mower DeckAccessories Pump release valvesCutting height pedal Operation OperationTraining Roll bar and safety belt Before StartingStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance MaintenanceMainte Least Hours Nance Once Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Safety system Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking the Parking Brake Faulty adjustment can cause an accidentChecking Tire Pressures Checking the V-beltsAlways use protective gloves when handling the blades Checking the BladesPump belt Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsLubrication LubricationLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountMower Deck Height Adjuster Front Wheel BearingsDeck belt pulleys Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-63 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data Technical DataIZ4217TSKAA IZ4817TSKAA IZ4821TKAA Productivity IZ5223TKAA IZ5223TKOA IZ6123TKAA CV23SEnglish-69 Torque Specifications Conformity Certificates USA requirementsDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110842R0108/03/05