Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN

Page 22

CONTROLS

8. Seat Locking Device

Under the rear part of the seat is a locking device that locks the seat into its folded position. The seat has hinges at the front edge and can be folded forward when the locking device is pushed.

9. Refueling

The machine has two fuel tanks, one on each side just behind the seat. The tanks take 5.7 gallons (22 liters) each.

The engine will run on a minimum of 87-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used beneficially. See also Technical Data concerning methanol and ethanol fuels.

WARNING!

Gasoline is highly flammable. Observe caution and fill the tank outdoors

(see the safety rules).

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

allow engine and exhaust system to cool at least two (2) minutes.

WARNING!

Fill to bottom of filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

When operating in temperatures below 32 °F. (0 °C.), use fresh, clean winter grade gasoline to help insure good cold weather starting.

8011-440

The seat’s locking device

8011-524

Fuel tanks

IMPORTANT INFORMATION

Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel tank or permanent damage may occur.

English-20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operators manual Page Contents OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationRoll over Protecion system Rops Customer responsibilitiesControls ControlsControl Locations Motion Control Levers Tracking Knob Hour MeterParking Brake Ignition Switch Blade switchFuses Seat Locking Device RefuelingFuel Shut Off Valve Seat Adjustment LeverChoke Control Throttle Control Lifting Lever for the Mower DeckPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance Maintenance= Described in this manual  = Not described in this manual Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking the Parking Brake Faulty adjustment can cause an accidentChecking Tire Pressures Checking the V-beltsChecking the Blades Pump beltRemove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-64 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data IZ5225TXPKOA IZ5223TVAN IZ6125TKOAEquipment IZ4217TSKAA IZ4817TSKAA IZ4821TKAA Overall dimensions IZ5223TKOA CV23SEnglish-72 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Delivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 English-83 English-84 Page 114090Rir08/21/06

iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN specifications

Husqvarna, a renowned name in outdoor power equipment, has a stellar lineup of zero-turn mowers that cater to both residential and commercial users. Their models, including the iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, and iZ5223TVAN, are designed with advanced technologies to enhance performance and user experience.

The iZ4217TSKAA is powered by a robust engine that delivers reliable performance for small to medium-sized lawns. It features a 21-inch cutting deck, making it ideal for maneuvering in tight spaces. The unit's intuitive controls ensure ease of operation while providing a smooth mowing experience.

Moving up the line, the iZ4817TSKAA offers increased power with a larger engine and a wider cutting deck. Its superior cutting technology provides a clean cut, while adjustable cutting heights allow users to customize their mowing experience. The model is engineered for durability, ensuring it withstands rigorous use over varying terrains.

The iZ4821TSKAA takes performance a step further with enhanced stability and traction. It includes all the features of its predecessor, coupled with a bigger deck, which significantly reduces mowing time. Its heavy-duty frame and rubberized tires improve grip on slopes, making it perfect for diverse landscapes.

For those looking for commercial-grade performance, the iZ5223TKOA is an excellent choice. With an impressive 23 horsepower engine, it delivers unmatched power and efficiency. Its cutting-edge air filtration system prolongs engine life, making it ideal for frequent use.

The iZ5225TXPKOA is designed for ultimate comfort, incorporating an ergonomic seating system that reduces operator fatigue during long mowing sessions. This model also features additional storage compartments, making it convenient for transporting tools and personal items.

Another heavy-duty option is the iZ6125TKOA, designed for professional landscapers. It boasts a 25 HP engine and a large cutting deck for maximum productivity. Its advanced suspension system offers superior ride quality even on bumpy terrains, while integrated safety features ensure a secure mowing experience.

Finally, the iZ5223TVAN combines versatility and power. Its innovative design allows for easy attachment of various accessories, making it a multifunctional tool in any landscaping arsenal. With a focus on user-friendly controls, this mower delivers a compelling performance for both novice and seasoned users.

Each of these Husqvarna models exemplifies the brand's commitment to quality and innovation, ensuring that whether for personal or professional use, users can achieve unparalleled results while enjoying the efficiency and reliability that Husqvarna mowers offer.
Top Page Image Contents