Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN

Page 52

MAINTENANCE

To adjust anti-scalp rollers

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti-scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

IMPORTANT INFORMATION

Adjust Anti-scalp rollers with the mower on a flat level surface.

The anti-scalp rollers can be set in three positions.

•Upper position 1.5” to 3” (38 to 76 mm) grass.

•Middle position 3” to 4.5” (76 to 114 mm) grass.

•Lower position 4.5” to 6” (114 to 152 mm) grass.

The rollers should be approximately 1/4” (6.5 mm) from ground.

IMPORTANT INFORMATION

The anti-scalp rollers must not be used for gauge wheels or the roller and deck may be damaged.

Engine oil cooler

Kohler engine only.

1.Clean the outside of fins with a brush.

2.Remove the two screws holding the cooler unit to the blower housing.

3.Tilt the cooler downward.

4.Clean the inside of the cooler with a brush or with compressed air.

5.Reinstall the oil cooler to the blower housing.

CZ-9

Anti-scalp roller

8011-472

Engine oil cooler

English-50

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Operators manual Page Contents OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationRoll over Protecion system Rops Customer responsibilitiesControls ControlsControl Locations Motion Control Levers Tracking Knob Hour MeterParking Brake Ignition Switch Blade switchFuses Seat Locking Device RefuelingFuel Shut Off Valve Seat Adjustment LeverChoke Control Throttle Control Lifting Lever for the Mower DeckPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Maintenance= Described in this manual  = Not described in this manual Battery To clean battery and terminalsReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsChecking the Blades Pump beltRemove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Cleaning and Washing Use protective glasses when cleaning and washingRemoval and installation of caster wheel Caster WheelsLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-64 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data IZ5225TXPKOA IZ5223TVAN IZ6125TKOAEquipment IZ4217TSKAA IZ4817TSKAA IZ4821TKAA Overall dimensions IZ5223TKOA CV23SEnglish-72 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 English-83 English-84 Page 114090Rir08/21/06

iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN specifications

Husqvarna, a renowned name in outdoor power equipment, has a stellar lineup of zero-turn mowers that cater to both residential and commercial users. Their models, including the iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, and iZ5223TVAN, are designed with advanced technologies to enhance performance and user experience.

The iZ4217TSKAA is powered by a robust engine that delivers reliable performance for small to medium-sized lawns. It features a 21-inch cutting deck, making it ideal for maneuvering in tight spaces. The unit's intuitive controls ensure ease of operation while providing a smooth mowing experience.

Moving up the line, the iZ4817TSKAA offers increased power with a larger engine and a wider cutting deck. Its superior cutting technology provides a clean cut, while adjustable cutting heights allow users to customize their mowing experience. The model is engineered for durability, ensuring it withstands rigorous use over varying terrains.

The iZ4821TSKAA takes performance a step further with enhanced stability and traction. It includes all the features of its predecessor, coupled with a bigger deck, which significantly reduces mowing time. Its heavy-duty frame and rubberized tires improve grip on slopes, making it perfect for diverse landscapes.

For those looking for commercial-grade performance, the iZ5223TKOA is an excellent choice. With an impressive 23 horsepower engine, it delivers unmatched power and efficiency. Its cutting-edge air filtration system prolongs engine life, making it ideal for frequent use.

The iZ5225TXPKOA is designed for ultimate comfort, incorporating an ergonomic seating system that reduces operator fatigue during long mowing sessions. This model also features additional storage compartments, making it convenient for transporting tools and personal items.

Another heavy-duty option is the iZ6125TKOA, designed for professional landscapers. It boasts a 25 HP engine and a large cutting deck for maximum productivity. Its advanced suspension system offers superior ride quality even on bumpy terrains, while integrated safety features ensure a secure mowing experience.

Finally, the iZ5223TVAN combines versatility and power. Its innovative design allows for easy attachment of various accessories, making it a multifunctional tool in any landscaping arsenal. With a focus on user-friendly controls, this mower delivers a compelling performance for both novice and seasoned users.

Each of these Husqvarna models exemplifies the brand's commitment to quality and innovation, ensuring that whether for personal or professional use, users can achieve unparalleled results while enjoying the efficiency and reliability that Husqvarna mowers offer.
Top Page Image Contents