Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN

Page 44

MAINTENANCE

Replacing the Air Filter

Standard air filter

If the engine seems weak or runs unevenly, the air filter may be clogged. If run with a dirty air filter, the spark plugs can become fouled, distupting operation.

For this reason, it is important to replace the air filter regularly (see the heading Maintenance Schedule for the proper service interval).

Cleaning/replacing the air filter is carried out as follows:

WARNING!

The engine and the exhaust system, become very hot during operation. Risk for burns if touched. Allow engine and exhaust system to cool at least two (2) minutes.

1.Remove the plastic fastener on the top of the air filter cowling and remove the air filter cowling.

2.Remove the foam rubber pre-filter and clean using a mild detergent.

Squeeze it dry with a clean cloth.

3.Remove the wing nuts for the air filter and remove the paper filter. Tap the paper filter against a fixed surface to remove dust. If the paper filter is still dirty, it must be replaced.

IMPORTANT INFORMATION

Do not used compressed air to clean the air filter.

Do not wash the paper filter. Do not oil the paper filter.

4.Refit the air filter as follows:

Check that the seal on the bottom of the paper filter is whole.

Mount the paper filter in the air filter housing and tighten the wing nuts.

5.Refit the pre-filter on the paper filter.

6.Replace the cowling over the air filter housing. Do not over tighten the plastic fastener.

8011-768

Remove the air filter cowling

8011-557

Remove the pre-filter

8011-558

Remove the paper filter

8009-181

Remove dust

English-42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Operators manual Page Contents OPERATOR’S Manual RiderEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxx xxxxxx Symbols and DecalsSymbols and Decals Repair work General Operation Safety InstructionsSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationRoll over Protecion system Rops Customer responsibilitiesControl Locations ControlsControls Motion Control Levers Parking Brake Hour MeterTracking Knob Fuses Blade switchIgnition Switch Seat Locking Device RefuelingChoke Control Seat Adjustment LeverFuel Shut Off Valve Throttle Control Lifting Lever for the Mower DeckCutting height pedal AccessoriesPump release valves Training OperationOperation Starting the Engine Roll bar and safety beltBefore Starting Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Maintenance= Described in this manual  = Not described in this manual Battery To clean battery and terminalsReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Safety system Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableChecking and Adjusting the Choke Cable Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsChecking the Blades Pump beltRemove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Cleaning and Washing Use protective glasses when cleaning and washingRemoval and installation of caster wheel Caster WheelsLubrication Schedule LubricationLubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountDeck belt pulleys Mower Deck Height AdjusterFront Wheel Bearings Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Problem Cause Trouble Shooting GuideTrouble Shooting Guide English-64 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramsTechnical Data IZ5225TXPKOA IZ5223TVAN IZ6125TKOAEquipment IZ4217TSKAA IZ4817TSKAA IZ4821TKAA Overall dimensions IZ5223TKOA CV23SEnglish-72 Torque Specifications USA requirements Conformity CertificatesConformity Certificates Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 English-83 English-84 Page 114090Rir08/21/06

iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN specifications

Husqvarna, a renowned name in outdoor power equipment, has a stellar lineup of zero-turn mowers that cater to both residential and commercial users. Their models, including the iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, and iZ5223TVAN, are designed with advanced technologies to enhance performance and user experience.

The iZ4217TSKAA is powered by a robust engine that delivers reliable performance for small to medium-sized lawns. It features a 21-inch cutting deck, making it ideal for maneuvering in tight spaces. The unit's intuitive controls ensure ease of operation while providing a smooth mowing experience.

Moving up the line, the iZ4817TSKAA offers increased power with a larger engine and a wider cutting deck. Its superior cutting technology provides a clean cut, while adjustable cutting heights allow users to customize their mowing experience. The model is engineered for durability, ensuring it withstands rigorous use over varying terrains.

The iZ4821TSKAA takes performance a step further with enhanced stability and traction. It includes all the features of its predecessor, coupled with a bigger deck, which significantly reduces mowing time. Its heavy-duty frame and rubberized tires improve grip on slopes, making it perfect for diverse landscapes.

For those looking for commercial-grade performance, the iZ5223TKOA is an excellent choice. With an impressive 23 horsepower engine, it delivers unmatched power and efficiency. Its cutting-edge air filtration system prolongs engine life, making it ideal for frequent use.

The iZ5225TXPKOA is designed for ultimate comfort, incorporating an ergonomic seating system that reduces operator fatigue during long mowing sessions. This model also features additional storage compartments, making it convenient for transporting tools and personal items.

Another heavy-duty option is the iZ6125TKOA, designed for professional landscapers. It boasts a 25 HP engine and a large cutting deck for maximum productivity. Its advanced suspension system offers superior ride quality even on bumpy terrains, while integrated safety features ensure a secure mowing experience.

Finally, the iZ5223TVAN combines versatility and power. Its innovative design allows for easy attachment of various accessories, making it a multifunctional tool in any landscaping arsenal. With a focus on user-friendly controls, this mower delivers a compelling performance for both novice and seasoned users.

Each of these Husqvarna models exemplifies the brand's commitment to quality and innovation, ensuring that whether for personal or professional use, users can achieve unparalleled results while enjoying the efficiency and reliability that Husqvarna mowers offer.
Top Page Image Contents