Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN

Page 43

MAINTENANCE

Checking the Engine's Cooling Air Intake

Check that the engine’s cooling air intake is free from leaves, grass, and dirt.

If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage.

Checking and Adjusting the

Throttle Cable

The illustrations show the Kawasaki engine. On Kohler engine the cables are mounted under the air filter housing. The throttle cable on Kohler engine must be mounted in the middle hole. The text is applicable for both engines.

Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle.

If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows for the lower cable:

1.Loosen the clamping screw for the cable’s outer casing and move the throttle to the full throttle position.

2.Check that the throttle cable is mounted in the correct hole in the lower lever, see illustration.

3.Push the throttle cable’s outer casing as far to the left as possible and tighten the clamping screw.

Checking and Adjusting the Choke Cable

Kohler engine; see remarks above.

If the engine produces black smoke or is difficult to start, this can be because the choke cable is incorrectly adjusted (upper cable).

If doubts arise, contact the service workshop. If adjustments are necessary, they can be made as follows:

1.Loosen the clamping screw for the cable’s outer casing and move the choke lever to the full choke position.

2.Check that the choke cable is mounted in the upper lever, see illustration. Push the choke cable’s outer casing as far to the right as possible and tighten the clamping screw.

8011-625

Check and clean the cooling air intake

8011-554

Adjusting the throttle cable

8011-555

Adjusting the choke cable

English-41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Operators manual Page OPERATOR’S Manual Rider ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Roll over Protecion system RopsControls ControlsControl Locations Motion Control Levers Tracking Knob Hour MeterParking Brake Ignition Switch Blade switchFuses Refueling Seat Locking DeviceFuel Shut Off Valve Seat Adjustment LeverChoke Control Lifting Lever for the Mower Deck Throttle ControlPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Maintenance Schedule= Described in this manual  = Not described in this manual Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking the V-belts Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakePump belt Checking the BladesRemove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleys Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-64 Winter Storage ServiceStorage StorageWiring diagrams Wiring DiagramsIZ5225TXPKOA IZ5223TVAN IZ6125TKOA Technical DataEquipment IZ4217TSKAA IZ4817TSKAA IZ4821TKAA Overall dimensions CV23S IZ5223TKOAEnglish-72 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Action Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 English-83 English-84 Page 114090Rir08/21/06

iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN specifications

Husqvarna, a renowned name in outdoor power equipment, has a stellar lineup of zero-turn mowers that cater to both residential and commercial users. Their models, including the iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, and iZ5223TVAN, are designed with advanced technologies to enhance performance and user experience.

The iZ4217TSKAA is powered by a robust engine that delivers reliable performance for small to medium-sized lawns. It features a 21-inch cutting deck, making it ideal for maneuvering in tight spaces. The unit's intuitive controls ensure ease of operation while providing a smooth mowing experience.

Moving up the line, the iZ4817TSKAA offers increased power with a larger engine and a wider cutting deck. Its superior cutting technology provides a clean cut, while adjustable cutting heights allow users to customize their mowing experience. The model is engineered for durability, ensuring it withstands rigorous use over varying terrains.

The iZ4821TSKAA takes performance a step further with enhanced stability and traction. It includes all the features of its predecessor, coupled with a bigger deck, which significantly reduces mowing time. Its heavy-duty frame and rubberized tires improve grip on slopes, making it perfect for diverse landscapes.

For those looking for commercial-grade performance, the iZ5223TKOA is an excellent choice. With an impressive 23 horsepower engine, it delivers unmatched power and efficiency. Its cutting-edge air filtration system prolongs engine life, making it ideal for frequent use.

The iZ5225TXPKOA is designed for ultimate comfort, incorporating an ergonomic seating system that reduces operator fatigue during long mowing sessions. This model also features additional storage compartments, making it convenient for transporting tools and personal items.

Another heavy-duty option is the iZ6125TKOA, designed for professional landscapers. It boasts a 25 HP engine and a large cutting deck for maximum productivity. Its advanced suspension system offers superior ride quality even on bumpy terrains, while integrated safety features ensure a secure mowing experience.

Finally, the iZ5223TVAN combines versatility and power. Its innovative design allows for easy attachment of various accessories, making it a multifunctional tool in any landscaping arsenal. With a focus on user-friendly controls, this mower delivers a compelling performance for both novice and seasoned users.

Each of these Husqvarna models exemplifies the brand's commitment to quality and innovation, ensuring that whether for personal or professional use, users can achieve unparalleled results while enjoying the efficiency and reliability that Husqvarna mowers offer.
Top Page Image Contents