Husqvarna iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN

Page 51

MAINTENANCE

Adjusting the Mower Deck

WARNING!

Before performing any service or adjustment checklist:

1.Engage the parking brake.

2.Place the blade-switch in the disengaged position.

3.Turn ignition switch to “OFF” position and remove the key.

4.Make sure the blades and all moving parts have completely stopped.

5.Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.

Leveling

1.Position the mower on a level, preferably concrete, surface.

2.Check the pressure in all four tires. See “Technical Data” section.

3.Rotate blades to align front to back.

4.Set cutting height to 4”.

5.Measure front blade tip, should be 4” from ground, if not turn locknut on top of front eyebolt till measurement is achieved. Check blade tip at front on opposite front blade. Adjust locknut on front eyebolt as necessary.

6.Check rear blade measurement, should be 4 1/4” from ground, if not turn locknut on top of rear eyebolt to achieve measurement. Repeat procedure on opposite side.

Adjusting Cutting Height

1.Raise and secure the deck height lever to the transport position (6").

2.Position blade tip so it is straight forward.

3.Measure from the cutting edge of the blades to a flat level surface. The distance should be 6" (150 mm).

4.Drop and secure the lever at (for example) the 2" cutting height. Measure as above. The distance should be 2"

(50 mm).

WARNING!

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

3

2

 

1

4

 

1. Front eyebolt

8011-601-1

 

2.Front locknut

3.Rear locknut

4.Rear eyebolt

Leveling the mower deck

English-49

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Operators manual Page OPERATOR’S Manual Rider ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Roll over Protecion system RopsControls ControlsControl Locations Motion Control Levers Hour Meter Tracking KnobParking Brake Blade switch Ignition SwitchFuses Refueling Seat Locking DeviceSeat Adjustment Lever Fuel Shut Off ValveChoke Control Lifting Lever for the Mower Deck Throttle ControlAccessories Pump release valvesCutting height pedal Operation OperationTraining Roll bar and safety belt Before StartingStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Maintenance Schedule= Described in this manual  = Not described in this manual Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Safety system Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking the V-belts Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakePump belt Checking the BladesRemove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication LubricationLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating in Accordance with the Lubrication Schedule Engine Oil Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Type Oil RecommendationsEngine Oil Kawasaki Engine Changing the Engine Oil Front Wheel Mount Throttle and Choke Cables, Lever BearingsMower Deck Height Adjuster Front Wheel BearingsDeck belt pulleys Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-64 Winter Storage ServiceStorage StorageWiring diagrams Wiring DiagramsIZ5225TXPKOA IZ5223TVAN IZ6125TKOA Technical DataEquipment IZ4217TSKAA IZ4817TSKAA IZ4821TKAA Overall dimensions CV23S IZ5223TKOAEnglish-72 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Action Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 8 Hours Hour Service English-78 English-79 English-80 At Least Once Each Year English-82 English-83 English-84 Page 114090Rir08/21/06

iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, iZ5223TVAN specifications

Husqvarna, a renowned name in outdoor power equipment, has a stellar lineup of zero-turn mowers that cater to both residential and commercial users. Their models, including the iZ4217TSKAA, iZ4817TSKAA, iZ4821TSKAA, iZ5223TKOA, iZ5225TXPKOA, iZ6125TKOA, and iZ5223TVAN, are designed with advanced technologies to enhance performance and user experience.

The iZ4217TSKAA is powered by a robust engine that delivers reliable performance for small to medium-sized lawns. It features a 21-inch cutting deck, making it ideal for maneuvering in tight spaces. The unit's intuitive controls ensure ease of operation while providing a smooth mowing experience.

Moving up the line, the iZ4817TSKAA offers increased power with a larger engine and a wider cutting deck. Its superior cutting technology provides a clean cut, while adjustable cutting heights allow users to customize their mowing experience. The model is engineered for durability, ensuring it withstands rigorous use over varying terrains.

The iZ4821TSKAA takes performance a step further with enhanced stability and traction. It includes all the features of its predecessor, coupled with a bigger deck, which significantly reduces mowing time. Its heavy-duty frame and rubberized tires improve grip on slopes, making it perfect for diverse landscapes.

For those looking for commercial-grade performance, the iZ5223TKOA is an excellent choice. With an impressive 23 horsepower engine, it delivers unmatched power and efficiency. Its cutting-edge air filtration system prolongs engine life, making it ideal for frequent use.

The iZ5225TXPKOA is designed for ultimate comfort, incorporating an ergonomic seating system that reduces operator fatigue during long mowing sessions. This model also features additional storage compartments, making it convenient for transporting tools and personal items.

Another heavy-duty option is the iZ6125TKOA, designed for professional landscapers. It boasts a 25 HP engine and a large cutting deck for maximum productivity. Its advanced suspension system offers superior ride quality even on bumpy terrains, while integrated safety features ensure a secure mowing experience.

Finally, the iZ5223TVAN combines versatility and power. Its innovative design allows for easy attachment of various accessories, making it a multifunctional tool in any landscaping arsenal. With a focus on user-friendly controls, this mower delivers a compelling performance for both novice and seasoned users.

Each of these Husqvarna models exemplifies the brand's commitment to quality and innovation, ensuring that whether for personal or professional use, users can achieve unparalleled results while enjoying the efficiency and reliability that Husqvarna mowers offer.
Top Page Image Contents