Husqvarna IZ 21 manual Before Starting, Starting the Engine

Page 27

OPERATION

Before Starting

•Read the sections "Safety Instructions" and "Controls" before starting the machine.

•Perform the daily maintenance before startin"g (see Maintenance Schedule in the Maintenance" section).

•Check that there is sufﬁcient fuel in the fuel tanks.

•Adjust the seat to the desired position.

The following conditions must be fulﬁlled before the engine can be started:

•the driver must be seated on the seat,

•the blade switch for engaging the mower blades must be depressed,

•the parking brake must be on,

•both steering controls must be in the locked (outer) neutral position.

Starting the Engine

1.Sit on the seat.

2.Raise the mower deck by pulling the lifting lever backward to the locked position (transport position).

3.Activate the parking brake.

8011-527

Start conditions

8011-552

Raise the mower deck

English-25

Image 27

Contents English Operator´s manualPage Operator S Manual Rider ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Transport Customer responsibilities Controls ControlsControl Locations Motion Control Levers Hour Meter Tracking KnobParking Brake Blade switch Ignition SwitchFuses Refueling Seat Locking DeviceSeat Adjustment Lever Fuel Shut Off ValveChoke Control Lifting Lever for the Mower Deck Throttle ControlTunnel Deck Only AccessoriesPump release valves Cutting height pedalOperation OperationTraining Starting the Engine Before StartingDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Maintenance ScheduleBefore After Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Safety system Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engine’s Cooling Air Intake Standard air filter Replacing the Air FilterCyclon air filter maintenance Air filter indicator optional Filter replacementChecking the Fuel Pump s Air Filter Replacing the Fuel FilterChecking the V-belts Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakePump belt Checking the BladesBlade attachment Adjusting Cutting Height Adjusting the Mower DeckTo adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelLubrication LubricationLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating in Accordance with the Lubrication Schedule Checking the Oil Level Engine Oil Changing the Engine OilFront Wheel Mount Throttle and Choke Cables, Lever BearingsMower Deck Height Adjuster Front Wheel BearingsDeck belt pulleys Tunnel Deck Only Mower Deck Struts Belt Adjuster, Mower DeckBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-61 Winter Storage ServiceStorage StorageWiring diagram Wiring DiagramsTransmission Technical DataEngine IZ21C ManufacturerIZ21C Tunnel Deck Combi Deck Accessories Standard HardwareMetric Standard Hardware Notiﬁed Body Conformity CertificatesConformity Certiﬁcates For Model Listed Below Business Name & AddressAction Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceEnglish-69 Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 English-76 Page 2010W19 Original instructions 115 36