Husqvarna IZ 21 manual Lubrication Schedule

Page 54

LUBRICATION

Lubrication

Lubrication Schedule

			8011-765
	Lubrication schedule
	12/12 Every year	Lubricate with grease gun	Lubricate with oil can
	1/52 Every week	Oil change	Level check
	1/365 Every day	Oil change	Level check
	1/365 Every day
		Filter change

General

Remove the ignition key to prevent unintentional movements during lubrication.

When lubricating with an oil can, it must be ﬁlled with engine oil.

When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulﬁde grease.

For daily use, the machine should be lubricated twice weekly.

Wipe away excess grease after lubrication.

It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts.

English-52

Image 54

Contents Operator´s manual EnglishPage Contents Operator S Manual RiderEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Operation English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Customer responsibilities Controls ControlsControl Locations Motion Control Levers Hour Meter Tracking KnobParking Brake Blade switch Ignition SwitchFuses Seat Locking Device RefuelingSeat Adjustment Lever Fuel Shut Off ValveChoke Control Throttle Control Lifting Lever for the Mower DeckCutting height pedal AccessoriesPump release valves Tunnel Deck OnlyOperation OperationTraining Before Starting Starting the EngineDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance MaintenanceBefore After Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Safety system Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engine’s Cooling Air Intake Replacing the Air Filter Standard air filterCyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump s Air FilterChecking the Parking Brake Faulty adjustment can cause an accidentChecking Tire Pressures Checking the V-beltsChecking the Blades Pump beltBlade attachment Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsLubrication LubricationLubrication Schedule Lubricating the Cables Shaft Bushings and LinkageLubricating in Accordance with the Lubrication Schedule Engine Oil Changing the Engine Oil Checking the Oil LevelThrottle and Choke Cables, Lever Bearings Front Wheel MountMower Deck Height Adjuster Front Wheel BearingsDeck belt pulleys Tunnel Deck Only Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-61 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramManufacturer Technical DataEngine IZ21C TransmissionIZ21C Tunnel Deck Combi Deck Accessories Standard HardwareMetric Standard Hardware Business Name & Address Conformity CertificatesConformity Certiﬁcates For Model Listed Below Notiﬁed BodyDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signEnglish-69 Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 English-76 Page Original instructions 115 36 2010W19