Husqvarna IZ 21 manual Changing the Oil Filter

LUBRICATION

14. Changing the Oil Filter

1.Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil.

2.	Remove the oil filter. If necessary, use a
	filter remover.
3.	Wipe new, clean engine oil onto the seal
	for the new filter.
4.	Mount the filter by hand with + 3/4 turn.
5.	Run the engine warm, then check that
	there	8011-570
	are no leaks around the oil filter seal.	Changing the oil filter

6.Check the oil level in the engine, top up if necessary. The oil filter holds 0.2 qt (0.2 liters) of oil.

English-59