Husqvarna GTH27V52LS owner manual Cleaning, IN-LINE Fuel Filter See Fig, Deck Washout Port See Fig

Page 17

MAINTENANCE

IN-LINE FUEL FILTER (See Fig. 19)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

FUEL FILTER

Fig. 19

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive.

CAUTION: Avoid all pinch points and movable parts (See Fig. 20)

CLUTCH/BRAKE PEDAL

CLEAN TOP SIDE

STEERING

PLATE

CAUTION:

PINCH

POINTS

STEERING SYSTEM,

DASH, FENDER AND

MOWER NOT SHOWN

Fig. 20

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

DECK WASHOUT PORT (See Fig. 21)

Your tractor’s deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use.

1.Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.

IMPORTANT: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2.Make sure the attachment clutch control is in the “DISENGAGED” position, set the parking brake, and stop the engine.

3.Thread the nozzle adapter (packaged with your tractor’s Operator’s Manual) onto the end of your garden hose.

4.Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle.

HOSE

NOZZLE ADAPTER

WASHOUT PORT

Fig. 21

IMPORTANT: Tug hose ensuring connection is secure.

5.Turn the water on.

6.While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast "" position.

IMPORTANT: Recheck the area making certain the area is clear.

7.Move the tractor’s attachment clutch control to the “EN- GAGED” position. Remain in the operator’s position with the cutting deck engaged until the deck is cleaned.

8.Move the tractor’s attachment clutch control to the “DISENGAGED” position. Turn the ignition key to the STOP position to turn the tractor’s engine off. Turn the water off.

9.Pull back the lock collar of the nozzle adapter to discon- nect the adapter from the nozzle washout port.

10.Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the “ENGAGED” position to remove excess water and to help dry before putting the tractor away.

WARNING: A broken or missing washout fitting could expose you or others to thrownobjectsfromcontactwiththeblade.

•Replace broken or missing washout fitting immediately, prior to using mower again.

•Pluganyholesinmowerwithboltsandlocknuts.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents GTH27V52LS Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Tools Required for Assembly AssemblyUnassembled Parts ToremovetractorfromcartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Attachment Clutch Switch Disengaged Engaged HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Move Forward and Backward See Fig To USE Cruise Control J See FigTo Stop Mower Blades Using the Reverse Operation SystemReverse Operation System ROS See Fig To Operate on HillsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolineAutomatic Transmission Warm UP Mowing TipsPurge Transmission Maintenance MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigEngine Deck Washout Port See Fig CleaningIN-LINE Fuel Filter See Fig To Install Mower See Fig Service and AdjustmentsInstall ANTI-SWAY BAR S if Equipped To Remove Mower See FigSecure with small washer and small retainer spring as shown To Level Mower To Check Brake To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt See Fig Belt InstallationFront Wheel TOE-IN/CAMBER To Remove Wheel See FigTo Remove CABLES, Reverse Order To Start Engine with a Weak Battery see FIGReplacing Battery See Fig Transmission Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine continues Service Notes Service Notes Service Notes Ggus 01.07.09 AP

GTH27V52LS specifications

The Husqvarna GTH27V52LS is a robust and versatile riding lawn tractor designed to provide an optimal mowing experience for homeowners with larger landscapes. Known for its powerful performance and advanced features, this model stands out as a reliable choice for tackling various lawn care tasks.

At the heart of the GTH27V52LS is its 27-horsepower Kohler engine, delivering ample power to handle expansive lawns with ease. The efficient engine provides a balance between performance and fuel economy, ensuring you can work for longer periods without frequent refueling. Additionally, the hydrostatic transmission allows for smooth, infinite speed control, making it simple to maneuver around obstacles and navigate uneven terrain.

One of the standout features of the GTH27V52LS is its 52-inch cutting deck, which provides an impressive cutting width for efficient mowing of large areas. The deck is designed with oversized tires that enhance traction and stability, ensuring a clean cut even on the toughest terrains. Furthermore, the deck height can easily be adjusted to suit varying grass lengths, enabling precise cutting for a polished finish.

The GTH27V52LS incorporates innovative mowing technologies, such as the Air Induction Mowing Technology, which improves airflow within the deck for a superior grass cutting and grass collection performance. This results in a healthier lawn with minimal clumping and enhanced mulching capabilities.

Comfort is also a priority in the design of the GTH27V52LS. The spacious, ergonomic seat offers ample cushioning and adjustable settings, ensuring a comfortable ride during extended mowing sessions. The easy-to-use controls are strategically located for convenience, enabling operators to maintain focus on the task at hand without interruptions.

Additional features include an integrated roll-over protection system for added safety, as well as a range of accessories, such as baggers and tow-behind attachments, that enhance the tractor’s functionality throughout the year. The durable construction and high-quality materials ensure that the Husqvarna GTH27V52LS is built to withstand the rigors of regular use, making it a long-lasting investment for any homeowner.

In summary, the Husqvarna GTH27V52LS combines power, technology, and user-friendly design, making it an outstanding choice for anyone in need of a reliable riding lawn tractor. Its exceptional performance and innovative features provide an efficient solution for maintaining large lawns, ensuring your outdoor space remains pristine year-round.
Top Page Image Contents