Cleaning
Cleaning the Laminator
Step 8. Insert the card into the slot (arrow below), adhesive side down.
Step 9. Pull the card all the way through the Heater Assembly thereby cleaning the heater rollers.
Step 10. Remove the card from the Heater Assembly.
Step 11. Turn the card over, adhesive side up; and repeat Step 8, Step 9, and Step 10. Step 12. Reinstall the Heater Assembly.
Step 13. Close the Laminator Door.
Step 14. Press Exit on the OCP when done.
Zebra ZXP Series 8 Card Printer with Laminator | 115 |
