Zebra Technologies P1013372-001 REV. A user manual Operational, Message Description

Operation

Operator Control Panel (OCP)

Operational

Operational Messages are displayed during the Printer’s normal operation.

MESSAGE	DESCRIPTION
ALARM	An error message needs to be cleared before normal operations
	can resume.
CANCELING	The Cancel button was pressed, and the current operation is
	being terminated.
CONFIG DATA	Configuration data is being transferred from the computer to
	the printer.
CONTACT OPERATION	Contact Smart Card is being encoded; i.e., the card is in position
	and data is being transferred.
CONTACTLESS OPERATION	Contactless Smart Card is being encoded; i.e., the card is in
	position and data is being transferred.
COOLING	Ready to accept a print job, rollers cooling; e.g., when switching
	from 2-sided printing to 1-sided printing.
COOLING	Print job received, cooling rollers to temperature.
PRINT JOB WAITING
COOLING	Cooling printhead to temperature.
PRINTHEAD TEMPERATURE
COOLING	Ready to accept a print job, laminator cooling; e.g., when
WAITING TO LAMINATE	switching from 2-sided laminating to 1-sided laminating.
DIAGNOSTIC	Diagnostic testing in progress.
JOB DATA	Data is being transferred from the computer to the printer.
LAMINATING	Print job received, laminating in process.
MAG OPERATION	A Magnetic Stripe Card is being encoded; i.e., card is in position
	and data is being transferred.
MANUALLY INSERT CARD	Waiting for manual card feed (this function is set via the Card
FROM FRONT	Setup Tab on page 73).
OFFLINE	Status toggled (offline/online) via the OCP Advanced
	Settings Menu.
PRINTING	Print job received, printing in process.
READY	Ready and at temperature.
STANDBY	Printer is in “sleep” mode; i.e., power save mode.
WAIT	Performing a self test on startup.
INITIALIZING
WARMING	Ready to accept a print job, rollers heating; e.g., at startup or
	when switching from 1-sided printing to 2-sided printing.
WARMING	Print job received, warming rollers to temperature.
PRINT JOB WAITING
WARMING	Ready to accept a print job, laminator warming; e.g., when
WAITING TO LAMINATE	switching from 1-sided laminating to 2-sided laminating.
WARMING	Warming printhead to temperature.
PRINTHEAD TEMPERATURE
WARNING	Indicates that additional OCP instructions need to be performed;
	e.g., PRINT RIBBON LOW, etc.

P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 53