Setting Custom Card Specifications
Adjustments
B.4.1 Adjustment Overview
When making adjustments, be aware that interdependencies exist between parameters; e.g., to fix the upward warpage, the first step is to decrease the front side transfer temperatures; but this could affect the partial transfer and possibly the flash.
To compensate for interdependency issues, adjust the parameters in the following order:
Step 1. Start by correcting any partial transfer issues using the same procedure outlined in Section B.4.2.
Step 2. Then attempt to improve warpage (Section B.4.3) and indentations (Section B.4.4). Start with the acceptable settings from Step 1. While adjusting parameters, ensure that the transfer quality remains acceptable. Do not continue reducing temperatures or increasing speeds if the transfer quality becomes unacceptable.
Step 3. Then attempt to improve flash (Section B.4.5). Start with the acceptable settings from Step 2. While adjusting parameters, ensure transfer and warpage remain acceptable.
Zebra ZXP Series 8 Card Printer with Laminator | 145 |