Cleaning the Printhead

Printhead cleaning removes deposits when print anomalies persist. To avoid deposits, only use foam-tipped swabs or pens.

Caution • Never use a sharp object or any abrasive to scrape deposits from the Printhead. Permanent damage to the Printhead will result.

Caution • Do not touch the Printhead if the printer has been in service in the last 10 minutes. It could be very hot and cause a burn.

Step 1.	Place the printer power switch in the OFF (	) position.
Step 2. Open the Door, and remove the print ribbon.
Step 3. Bend the Cleaning Swab to release the cleaning fluid.
Step 4.	Clean Printhead by moving Cleaning Swab tip side-to-side across the Printhead
	elements. Only use moderate force. To re-order Cleaning Swabs, see the Media List
	on the User Documentation and Drivers CD supplied with this printer.
Step 5.	Reinstall the print ribbon, and close the Door.
Step 6.	Place the printer power switch in the ON (	) position.

116

P1013372-001 Rev. A

Zebra Technologies P1013372-001 REV. A user manual Cleaning the Printhead