Zebra Technologies P1013372-001 REV. A user manual Magnetic Encoder Cleaning

Magnetic Card Encoder

Magnetic Encoder Cleaning

The Magnetic Encoder is cleaned as part of the printer cleaning process; see Section 6. If the frequency of encoding errors increases, the head may need additional cleaning. To clean, only use foam-tipped swabs.

Caution • Never use a sharp object or any abrasive to scrape deposits from the Magnetic Encoder. Permanent damage to the Magnetic Head will result.

Step 1. Open the Door.

Step 2. Open the idler roller assembly door.

Step 3. Bend the Cleaning Swab to release the cleaning fluid.

Step 4. Clean the Magnetic Encoder by moving Cleaning Swab tip side-to-side across the head elements. To re-order Cleaning Swabs, see the Media List on the User Documentation and Drivers CD supplied with this printer.

Step 5. Close the idler roller assembly door.

Step 6. Close the Door.

194 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A