Smart Card Options
Contact Station Smart Card Interface
When a command to the printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female
Smart Card Contact Station
An attached external Smart Card Programmer can be used to program Smart Card chips. The following table shows the Smart Card Contact Points.
Pin | Smart Card Contact Points |
| Smart Card Contact Points | |
1 | C1 (VCC) | 6 | C6 (Vpp) | |
|
|
|
| |
2 | C2 (Reset) | 7 | C7 (I/O) | |
|
|
|
| |
3 | C3 (Clock) | 8 | C8 (RFU) | |
|
|
|
| |
4 | C4 (RFU) | 9 | (GND when chip | |
5 | C5 (GND) | is at station) | ||
| ||||
|
|
|
|
202 | Zebra ZXP Series 8 Card Printer with Laminator |
