Zebra Technologies P1013372-001 REV. A user manual Uv Panel Pop-Up, Select the Uv type

Printer Settings and Adjustments

Card Printer Printing Preferences

Uv Panel Pop-Up

A Uv Panel is a resin-based coating similar to a “K” panel and is used to print invisible images (text or graphics) that will glow in the visible spectrum when exposed to a Black Light.

The Uv Panel pop-up window allows you to manage and configure printing with a Uv Panel. This window is only available when using Uv ribbons (e.g., YMCUvK) and is automatically enabled in the driver when a recognized YMCUvK ribbon is installed.

To access the Uv Panel pop-up window, select Start > Printers and Faxes. Right click on the Zebra ZXP Series 8 Card Printer listing, and select Printing Preferences > Card Setup. Select Ribbon info > Front Uv... or Back Uv...

The figure below shows settings for the front side of the card; settings for the back side of the card are identical.

•Select the Uv type:

-Disable Uv: Default, no Uv panel will be applied.

-Full Uv varnish: Prints the entire card with full Uv panel.

-Selected area blank: Using the Area Manager (described on next page) allows you to create one or more rectangles to exclude from Uv print.

-Selected area Uv varnish: Using the Area Manager (described on next page) allows you to create one or more rectangles to print.

-Bitmap based Uv varnish: Allows you to import a bitmap image to print on the Uv panel; e.g., import a security seal.

76 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A