Husqvarna EZ4822, EZ6124, EZ5226, EZ4621, EZ4220 manual Operating on hills

Page 32

OPERATION

a straight line forward or backward respectively.

In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right.

Turning on the spot can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position.

Operating on hills

Read the Safety Instructions “Driving on Slopes” in the “Safety Instructions”.

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes.

The slowest speed possible should be used before starting up or down hills.

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the parking brake.

IMPORTANT INFORMATION

Control levers return to neutral when released. This may cause the mower to suddenly stop.

To restart movement, release the parking brake.

Pull the control levers back to the center of the mower and press forward to regain forward motion.

Make all turns slowly.

8011-772

Stoppingconditions

8011-711

Released parking brake

English-33

Image 32
Contents Operator’s Manual EnglishContents OPERATOR’S ManualPage Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx Xxxxxxxxx xxxxxx Xx xxxxxxxx xxxxRead General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline MaintenanceGeneral Maintenance Never drive the machine in an enclosed space Risk of sparking Transport Customer responsibilities Controls ControlsParking Brake Steering Control LeversTracking Seat adjustment boltsFuel Shut Off Valve Refueling By pass linkage FusesChoke Control Ignition SwitchHour Meter Blade switch Throttle ControlAccessories Cutting height pedalOperation OperationTraining To move forward and backwardBefore Starting Starting the EngineMove the throttle to the middle position Open the fuel shut off valve Gradually press in the choke control To remove cables, reverse order To start an engine with a weak batteryTo attach jumper cables Running Operating on hills Mowing Tips Stopping the EngineLeaving the ignition switch in any other Moving by Hand Maintenance Schedule MaintenanceMaintenance English-38 Replacing battery BatteryTo clean battery and terminals Checking the Safety System Ignition SystemChecking the Engine’s Cooling Air Intake Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Replacing the Air Filter Briggs & Stratton Engine Standard air filterReplacing the Air Filter Kohler Engine Servicing PrecleanerService Paper Element Replacing Heavy Duty Air Filter Checking Tire Pressures Replacing the Fuel FilterChecking the Fuel Pump’s Air Filter Checking the Parking Brake Checking the V-beltsDeck belt To replace deck beltDeck belt installation Belt installation IZT beltTo replace IZT Integraded Zeroturn Transaxle belt IZT belt removalChecking the Blades Blade replacement Leveling Adjusting the Mower DeckAdjusting Cutting Height To adjust anti-scalp rollers Cleaning and Washing Removal and installation of caster wheelCaster Wheels HardwareTracking adjustment To adjust parking brakeMower is tracking to the right Mower is tracking to the leftLubrication LubricationGeneral Lubrication ScheduleLubricating the Cables Lubricating in Accordance with the Lubrication ScheduleFront Wheel Mount Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Engine Oil Filter Transaxle Transmission Fluid ChangeDrain old oil filters of all free flowing oil prior to Purging Procedures Problem Cause Trouble Shooting GuideTrouble Shooting Guide English-63 English-64 Service StorageStorage Winter StorageWiring Diagram Technical Data Technical DataEZ4624 EZ5226 Engine TransmissionTechnical Data EZ4624 EZ5226 Equipment EZ4220 EZ4822 Engine EZ 4220 EZ4822 Equipment Technical Data Productivity Conformity Certificates Conformity CertificatesUSA requirements CE requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-78 English-79 Service Journal At Least Once Each Year Service Journal Page Page Part No 131329Rir 07/02/07