Husqvarna EZ6124 Checking the Engine’s Cooling Air Intake, Checking and Adjusting the Choke Cable

MAINTENANCE

Checking the Engine’s Cooling Air Intake

Check that the engine’s cooling air intake is free from leaves, grass, and dirt.

If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. The cooling air intakes rotates when the engine is running. Mind your fingers.

Checking and Adjusting the Throttle Cable

Check that the engine responds to throttle increases and that a good engine speed is attained at full throttle. If doubts arise, contact the service workshop.

If adjustments are necessary, they can be made as follows for the lower cable:

1.Loosen the clamping screw for the cable’s outer casing and move the throttle to the full throttle position.

2.Check that the throttle cable is mounted in the correct hole in the lower lever, see illustration.

3.Push the throttle cable’s outer casing as far to the right as possible and tighten the clamping screw.

Checking and Adjusting the Choke Cable

If the engine produces black smoke or is difficult to start, this can be because the choke cable is incorrectly adjusted (upper cable).

If doubts arise, contact the service workshop.

If adjustments are necessary, they can be made as follows:

1.	Loosen the clamping screw for the cable’s outer
	casing and push the choke control fully in.
2.	Check that the choke cable is mounted in the upper
	lever, see illustration. Push the choke cable’s outer
	casing as far to the left as possible and tighten the

8011-719

Check and clean the cooling air intake

1

2

8011-720

2.Throttle cable Adjusting the throttle cable

1

2

clamping screw.

1. Choke cable

8011-720

Adjusting the choke cable

English-41