Husqvarna Z18 manual Moving by Hand

Page 34

OPERATION

Moving by Hand

WARNING!

Make no adjustments without: - the engine stopped,

-the ignition key removed,

-the parking brake activated.

When pushing or pulling the mower, be sure to engage the IZT (Integraded Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame.

•Raise the deck into the highest cutting position.

•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.

•To reengage the IZT’s to drive, reverse the above procedure.

8011-722

1. IZT Bypass linkages Bypass linkages

8011-722

1.Head outside of rear deck

2.IZT Bypass linkage in bypass position

Bypass position

32-English

Image 34

Contents Z18 EnglishPage Contents OPERATOR’S Manual Rider SeriesEnglish Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Use Hearing Do as follows Driving on SlopesDo not Children Utility BoxMaintenance Risk of sparking Use protective glasses for maintenance work TransportCustomer responsibilities Controls ControlsControl Locations Motion Control Levers TrackingSeat adjustment knobs FusesBy pass linkages Blade switch RefuelingChoke Control Ignition SwitchThrottle Control Parking Brake Hour MeterMachine must be stopped before activating the parking brake Accessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety System Checking and Adjusting Throttle Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Kohler engineInstall the cover and tighten the knobs by Checking Tire Pressures Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation To replace EZT E-Series Zeroturn Transaxle belt EZT beltEZT belt removal Always use protective gloves when handling the blades Checking the BladesAdjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing HardwareLubrication Lubrication ScheduleCaster wheels Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Checking the oil level Engine oil Kohler Changing the engine oil Changing the Oil Filter TransmissionTrouble Shooting Guide Trouble Shooting GuideProblem Cause Trouble Shooting Guide English-59 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataZ18 Equipment Torque Speciﬁcations Conformity Certificates Conformity CertiﬁcatesDelivery Service Service JournalService Journal ActionAfter the First 5-8 Hours Hour Service English-69 Service Journal English-71 At Least Once Each Year Action Date, mtr reading, stamp, sign Service Journal English-75 ´z+RP¶6P¨ English-77 115 04 ´z+RP¶6P¨ ´z+RP¶6P¨