Husqvarna Z18 manual Accessories, Torque Specifications

TECHNICAL DATA

Accessories

Head lights

BioClip attachment (Mulch clip)

Collection system

Torque Specifications

·Engine crankshaft bolt	50 ft/lb (67 Nm)
·Deck pulley bolts	45 ft/lb (61 Nm)
·Lug nuts	75 ft/lb (100 Nm)
·Blade bolt	27-35 ft/lb (35-45 Nm)
·Standard π” fasteners	9 ft/lb (12 Nm)
·Standard 5/16” fasteners	18 ft/lb (25 Nm)
·Standard 3/8” fasteners	33 ft/lb (44 Nm)
·Standard 7/16” fasteners	52 ft/lb (70 Nm)
·Standard ∫” fasteners	80 ft/lb (110 Nm)

When this product is worn out and no longer used, it shall be returned to the reseller or other party for recycling.

In order to implement improvements, specifications and designs can be altered without prior notification.

Note that no legal demands can be placed based on the information contained in these instructions.

Use only original parts for repairs. The use of other parts voids the warranty.

Do not modify or install non-standard equipment to the unit without consent from the manufacturer. Modifications to the unit may cause unsafe operation or damage the unit.

64-English