
MAINTENANCE
Checking the Parking Brake
Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a
To adjust the parking brake, contact the Husqvarna service workshop.
WARNING!
Faulty adjustment can cause an accident.
Checking the V-belts
Check every 100 hours of operation. Check for severe cracking and large nicks.
NOTE: The belt will show some small cracks in normal operation.
The belts are not adjusable. Replace belts if they begin to slip from wear.
Deck belt
To replace deck belt
Deck belt removal.
•Park on a level surface. Apply park brake.
•Lower the deck into the lowest cutting position.
•Disengage the tension relief lever from the lock bracket.
WARNING!
Lever is spring loaded. Have a tight grip on the lever and release slowly.
•Remove screws from both the left and right belt shields, and remove shields.
•Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.
The parking brake in the disengaged position
IMPORTANT INFORMATION
The maschine must be absolutely stand still when applying the parking brake.
1
2
1.Clutch pulley
2.Deck belt
Belt routing, deck belt