Husqvarna Z4818BIA/968999250 manual Service Journal, Delivery Service

Page 70

SERVICE JOURNAL

Service Journal

Action

Date, mtr reading, stamp, sign

Delivery Service

1. Charge the battery.

2. Adjust the tire pressure of all wheels to 15 PSI (1 bar).

3. Mount the steering controls in the normal position.

4.Connect the contact box to the cable for the seat’s

 

safety switch.

 

5.

Check that the right amount of oil is in the engine.

 

6.

Adjust the position of the steering controls.

 

7.

Fill with fuel and open the fuel shut of valve.

 

8.

Start the engine.

 

9.

Check that there is drive to both wheels.

 

10.

Check the mower deck adjustment.

 

11.

Check:

 

 

The safety switch for the parking brake.

 

 

The safety switch for the mower deck.

 

 

The safety switch in the seat.

 

 

The safety switch in the steering controls.

 

 

Parking brake functionality.

 

 

Driving forward.

 

 

Driving backward.

 

 

Engaging the blades.

 

12.

Check the idle speed

 

13.

Check the engine high idle speed

 

14.

Inform the customer about:

Delivery service has been carried

 

The need and advantages of following the service schedule.

out.

 

 

 

The need and advantages of leaving the machine

No remaining notes.

 

 

 

for service every 300 hours.

Certified:

 

The effects of service and maintaining a service journal on

 

 

the machine’s resale value.

 

 

Application areas for Mulching.

 

15.Fill in the sales papers, etc.

 

English-68

Image 70
Contents Z4818BIA/968999250 Page OPERATOR’S Manual Rider English-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Greater Than Careful Safety Instructions Safety InstructionsGeneral Use Hearing Do as follows Driving on SlopesDo not Children Maintenance Poisonous, and lethal gas Use protective glasses for maintenance work TransportCustomer responsibilities Controls Control LocationsTension Relief Lever Parking BrakeMotion Control Levers TrackingSeat adjustment knobs Fuel Shut Off ValveRefueling By pass linkage FusesHour Meter Ignition SwitchChoke Control Blade switch Throttle ControlAccessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual  = Not described in this manua To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety System Checking and Adjusting the Choke Cable Checking and Adjusting the Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterChecking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Checking the V-belts Faulty adjustment can cause an accidentChecking the Parking Brake Deck beltDeck belt installation To replace IZT Integraded Zeroturn Transaxle belt Belt installationIZT belt IZT belt removalAlways use protective gloves when handling the blades Checking the BladesRemove blade bolt by turning counterclockwise Adjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsParking brake Tracking adjustmentTo adjust parking brake Mower is tracking to the rightLubrication LubricationLubrication Schedule Front Wheel Mount Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Oil Filter TransmissionTrouble Shooting Guide Trouble Shooting GuideProblem Cause Water in the fuel English-61 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataZ4818BIA Productivity Accessories Torque SpecificationsConformity Certificates USA requirementsDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 109797R0108/10/05