Husqvarna Z4818BIA/968999250 manual Changing the Oil Filter, Transmission

Page 60

LUBRICATION

6. Changing the Oil Filter

1. Drain the engine oil in accordance with the work description under the heading Engine Oil/Change Engine Oil.

2.Remove the oil filter. If necessary, use a

filter remover.

3. Wipe new, clean engine oil onto the seal for the new filter.

4.Mount the filter by hand with + 3/4 turn.

5. Run the engine warm, then check that
there are no leaks around the oil filter	8011-734
seal.	Changing the oil filter

6.Check the oil level in the engine, fill if necessary. The oil filter holds 0.1 qt (0.1 liters) of oil.

Transmission

The transmission is maintenance free. There is no need for level checks or oil changes. If a leak occurs, replace the unit or contact your Husqvarna dealer.

English-58

Image 60

Contents Z4818BIA/968999250 Page OPERATOR’S Manual Rider English-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Greater Than Careful Safety Instructions Safety InstructionsGeneral Use Hearing Driving on Slopes Do as followsDo not Children Maintenance Poisonous, and lethal gas Use protective glasses for maintenance work TransportCustomer responsibilities Controls Control LocationsTension Relief Lever Parking BrakeMotion Control Levers TrackingSeat adjustment knobs Fuel Shut Off ValveRefueling By pass linkage FusesIgnition Switch Hour MeterChoke Control Blade switch Throttle ControlAccessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manua Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Checking and Adjusting the Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Replacing the Air Filter Standard air filterReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures Faulty adjustment can cause an accident Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation Belt installation IZT beltTo replace IZT Integraded Zeroturn Transaxle belt IZT belt removalAlways use protective gloves when handling the blades Checking the BladesRemove blade bolt by turning counterclockwise Adjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Cleaning and Washing Use protective glasses when cleaning and washingRemoval and installation of caster wheel Caster WheelsTracking adjustment To adjust parking brakeParking brake Mower is tracking to the rightLubrication LubricationLubrication Schedule Lubricating the Cables Lubricating in Accordance with the Lubrication Schedule Front Wheel Mount Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Oil Filter TransmissionTrouble Shooting Guide Trouble Shooting GuideProblem Cause Water in the fuel English-61 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataZ4818BIA Productivity Accessories Torque SpecificationsConformity Certificates USA requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-71 English-72 English-73 At Least Once Each Year English-75 109797R0108/10/05