Husqvarna Z3815BIA, Z3815BIA, Z4217BIA, Z4218KOA, Z4218KOA manual Checking the Safety System

Page 39

MAINTENANCE

Checking the Safety System

The machine is equipped with a safety system that prevents starting or driving under the following conditions.

The engine can only be started when:

1.The mower deck is disengaged.

2.The steering controls are in the outer, locked neutral position.

3.The driver is sitting in the driver’s seat.

4.The parking brake is on.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again.

Make sure the engine stops when the parking brake is not engaged and the operator leaves the seated position.

Check that the engine stops if the mower blades are engaged and the driver temporarily stands up.

8011-484

Conditions for starting

IMPORTANT INFORMATION

In order to be able to drive, the driver must sit in the seat and release the parking brake before the steering controls can be moved into the neutral position, otherwise the engine will stop.

English-37

Image 39

Contents Operator´s manual Page OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Use Hearing Driving on Slopes Do as followsDo not Utility Box ChildrenMaintenance Risk of sparking Transport Use protective glasses for maintenance workCustomer responsibilities Control Locations ControlsTracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchIgnition Switch Choke ControlThrottle Control Hour Meter Parking BrakeMachine must be stopped before activating the parking brake Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting the Throttle CableBriggs and Stratton engine Replacing the Air FilterRemove the pre-cleaner Kohler engine Checking the Parking Brake Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking Tire PressuresDeck belt Checking the V-beltsDeck belt installation EZT belt To replace EZT E-Series Zeroturn Transaxle beltEZT belt removal Checking the Blades Always use protective gloves when handling the bladesAdjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Hardware Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsLubrication LubricationLubrication Schedule Engine Oil Briggs & Stratton Changing the Engine Oil Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Caster wheelsOil drain valve Checking the oil level Engine oil Kohler Changing the engine oil Transmission Changing the Oil FilterTrouble Shooting Guide Trouble Shooting GuideProblem Cause Water in the fuel English-60 Winter Storage ServiceStorage StorageWiring diagram Wiring DiagramsTechnical Data Technical DataZ3815 Z4218 Z4217 Equipment Torque Specifications USA requirements Conformity CertificatesAction Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 Action At Least Once Each Year111826R0211/29/05