Husqvarna Z3815BIA, Z3815BIA, Z4217BIA, Z4218KOA, Z4218KOA manual Lubrication Schedule

Page 54

LUBRICATION

Lubrication

Lubrication Schedule

			8011-673
	Lubrication schedule
	12/12 Every year	Lubricate with grease gun	Lubricate with oil can
	1/52 Every Week	Oil change	Level check
	1/365 Every day	Oil change	Level check
	1/365 Every day
		Filter change

General

Remove the ignition key to prevent unintentional movements during lubrication.

When lubricating with an oil can, it must be filled with engine oil.

When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulfide grease.

For daily use, the machine shall be lubricated twice weekly.

Wipe away excess grease after lubrication.

It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts.

English-52

Image 54

Contents Operator´s manual Page Contents OPERATOR’S Manual Rider SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Use Hearing Driving on Slopes Do as followsDo not Children Utility BoxMaintenance Risk of sparking Use protective glasses for maintenance work TransportCustomer responsibilities Controls Control LocationsMotion Control Levers TrackingSeat adjustment knobs FusesBy pass linkages Blade switch RefuelingIgnition Switch Choke ControlThrottle Control Hour Meter Parking BrakeMachine must be stopped before activating the parking brake Accessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDisengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual Battery To clean battery and terminalsReplacing battery Ignition System Checking the Safety System Checking and Adjusting the Throttle Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Briggs and Stratton engineRemove the pre-cleaner Kohler engine Checking Tire Pressures Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation EZT belt To replace EZT E-Series Zeroturn Transaxle beltEZT belt removal Always use protective gloves when handling the blades Checking the BladesAdjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing HardwareLubrication LubricationLubrication Schedule Caster wheels Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Checking the oil level Engine oil Kohler Changing the engine oil Changing the Oil Filter TransmissionTrouble Shooting Guide Trouble Shooting GuideProblem Cause Water in the fuel English-60 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataZ3815 Z4218 Z4217 Equipment Torque Specifications Conformity Certificates USA requirementsDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-70 English-71 English-72 At Least Once Each Year Action111826R0211/29/05