Husqvarna CTH151 owner manual To Dump Bagger See, To Convert Mower See Fig, Bagging see Fig

Page 17

OPERATION

•Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path.

•Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.

TO DUMP BAGGER (See Fig.16)

Your tractor is equipped with a Dump Bag Alarm.To turn off the alarm disengage the attachment clutch switch.

•Position tractor in location you wish to dump bagger.

•Place motion control lever in Neutral position and set parking brake.

•Raise dump handle to its highest position. Pull handle forward to raise bagger and dump clippings.

•To continue mowing, be sure bagger is down and in proper operating position which will allow mower to operate.

02207

FIG. 16

TO CONVERT MOWER (See Fig. 17)

(Converting to mulching or rear discharging will require a mulcher plug and discharge deflector)

MULCHING (Requires mulcher plug)

• Place deck into the high cut position.

• Remove bagger or optional rear discharge deflector.

• Unhook the two (2) straps and remove discharge chute

• Insert mulcher plug and handle assembly through back plate and onto the mower deck chute adaptor.

• Secure the plug assembly by connecting the two straps over the handle and hook into the holes provided .

17

•Replace bagger or optional rear discharge deflector to allow mower to operate.

You are now ready to begin mulching.

MULCHER PLUG

31 23 0

FIG. 17

BAGGING (see Fig. 18)

•Place deck into the high cut position.

•Remove the rear discharge deflector or mulching plug.

•Insert the discharge chute into the opening in the backplate and onto the mower deck adaptor.

•Attach the chute to the tractor by hooking the two straps to the flange of the chute.

NOTE: The strap hook must go through the discharge chute only. Do not allow the hook to enter the slot in the tractor back plate. If it does, the discharge chute will not float with the mower deck when mowing on uneven terrain.

•Install bagger onto tractor.

DISCHARGE

CHUTE

HOOK

02306

BACKPLATE

 

SLOT

FIG. 18

REAR DISCHARGING (optional accessory required)

•Place deck into the high cut position.

•Remove bagger and mulching plug (if installed).

•Depress rear door and install discharge chute through opening in backplate and slide over deck adaptor.

•Attach the chute by hooking the two straps into the holes in the flange of the chute.

NOTE: The strap hook must go through the discharge chute only. Do not allow the hook to enter the slot in the tractor back plate. If it does, the discharge chute will not float with the mower deck when mowing on uneven terrain.

•Install the discharge deflector to the backplate by screw- ing the four (4) wing screws into the threaded inserts located in the backplate.

•Tighten the wing screws securely.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CTH151 IV. Service Safety RulesGeneral Operation II. Slope OperationSafety Rules Table of Contents Unassembled Parts BatterySteering Wheel Seat KeyTools Required for Assembly AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig To Assemble Bagger See Figs To Install Bagger Components to Tractor See Figs A-4DHorizontal Adjustment Bagger Adjustment See FigVertical Adjustment To Assemble and Install Mulcher Plug See FigCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Operate Mower See FigTo Operate on Hills Check Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigMulching Mowing Tips Mowing TipsPurge Transmission Bagging see Fig To Dump Bagger SeeTo Convert Mower See Fig Lubrication Chart MaintenanceGeneral Recommendations Before Each USEBrake Operation TractorTires Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Level Mower Housing To Remove Mower See FigTo Replace Mower Blade Drive Belt See Fig To Check and Adjust Brake See FigTo Replace Motion Drive Belt See Fig Transmission REMOVAL/REPLACEMENTTransaxle Motion Control Lever Neutral ADJUSTMENTSee Fig To Adjust Throttle Control Cable To Adjust Steering Wheel AlignmentTo Adjust Carburetor Front Wheel TOE-IN/CAMBEROther StorageFuel System Engine OILTroubleshooting Points When operator leaves seat TRACTOR- -MODEL NO. CTH151 HAUCT15HK36A, Product no 17 SchematicElectrical KEY Part Description 261 Chassis and EnclosuresRepair Parts Drive Repair Parts Steering Assembly 532 16 Steering Wheel 532 18 Seat Seat AssemblyWheels & Tires DecalsEngine 117 532 18 Tube Exhaust Mower Lift 532 15 94-60 Washer Asm Inner Spring W/Plunger Mower SVC CRD532 17 Plug Tubing End BaggerWarranty Statement Suggested Guide for Sighting Slopes for Safe Operation

CTH151 specifications

The Husqvarna CTH151 is a standout in the realm of lawn care, designed to deliver exceptional performance, reliability, and ease of use. This compact tractor combines advanced technology with practical features, making it a fitting choice for both residential and commercial landscaping tasks.

One of the defining features of the CTH151 is its robust engine. Powered by a reliable Briggs & Stratton engine, the tractor ensures ample power for tackling various mowing conditions. This engine is designed for durability and easy starting, providing peace of mind for users who depend on their equipment for consistent performance.

The CTH151 boasts a cutting deck size of 42 inches, allowing it to efficiently manage medium to large mowing areas. The deck’s design optimizes grass dispersion, resulting in a clean and uniform cut. Furthermore, the cutting height can be easily adjusted to suit different grass types and seasonal changes, providing flexibility for any lawn care routine.

The innovative Dual Hydrostatic transmission system of the CTH151 allows for smooth and precise control, enabling the operator to navigate through tight spaces and around obstacles with ease. This feature is especially beneficial for those with intricately landscaped yards. With its zero-turn capability, users can expect improved maneuverability, reducing the need for trimming and enhancing overall mowing efficiency.

Ergonomics play a crucial role in the design of the Husqvarna CTH151. The comfortable seat and intuitive controls allow for extended periods of use without fatigue. The dashboard features clear indicators and easy-to-reach controls, making the tractor user-friendly for both seasoned operators and newcomers alike.

Safety is a priority with the CTH151, equipped with features like an automatic blade brake and a seat switch that stops the engine when the operator leaves the seat. These features enhance the overall safety of the tractor, providing reassurance while performing yard tasks.

In terms of maintenance, the CTH151 is designed with accessibility in mind. Oil changes and blade replacements can be carried out with minimal effort, making upkeep straightforward and manageable.

Overall, the Husqvarna CTH151 combines power, efficiency, and user-friendly features, establishing itself as an invaluable tool for anyone serious about maintaining a pristine lawn. With its thoughtful design and advanced technologies, it ensures that grass cutting is not just a chore, but an enjoyable and satisfying experience.
Top Page Image Contents