91
Editing
E
Recording from Digital Video Devices (DV Dubbing)You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
❍When recording from digital video devices, make sure that “AV \DV” is not
displayed on the screen. If “AV \DV” is displayed, change the setting
(94).
❍Anomalous signals sent from the connected device may be recorded as
anomalous picture (although it may not appear so on the screen), or it may not
be recorded at all.
❍Copyright protected signals cannot be recorded.
❍Blank sections may be recorded as anomalous picture.
❍If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
❍You can connect only one device with the DV cable.
❍You can use the camcorder for playback and recording without reconnecting
the DV cable.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device(89).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
“DV IN” appears.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the e/abutton when the scene you wish to
record appears.
7. Press the 3button to stop recording.
•Press the e/abutton to pause recording.
•Press the e/abutton again to restart recording.
8. Connected Device: Stop playback.
CARD CAMERA
CARD CAMERA
PLAY (VCR)
CAMERA