97
Editing
E
Audio DubbingYou can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
❍Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SP
mode 12-bit audio sound using the analog line-in function.
❍Do not connect/disconnect any cable to/from the camcorder while dubbing.
❍You cannot use the DV terminal for audio dubbing.
❍If you add sound to a tape not recorded with this camcorder, sound quality
may decrease.
❍Sound quality may decrease when you add sound to the same scene for more
than 3 times.
Connecting an Audio Device
You can monitor the picture on the LCD screen or a TV connected via the
S-video terminal, and check the sound with the built-in speaker.
AV
R
L
STV-250N Stereo Video Cable
(supplied)
Signal flow