Samsung GX-1L Setting the Exposure, INFORMATION, If the subject is too bright or too dark, the aperture value will, Exposure Warning

Setting the Exposure

INFORMATION

Turn the e-dial while pressing the button and change the EV Compensation value. Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [ Custom Setting] menu. (p.141)

You can automatically correct the sensitivity if appropriate exposure cannot be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.115)

Exposure WarningIf the subject is too bright or too dark, the aperture value will

blink in the viewfinder and on the LCD panel. If the subject is too bright, choose a faster shutter speed. If it is too dark,

choose a slower shutter speed. When the aperture value indication stops blinking, you can take the picture with proper exposure.

If both the shutter speed and aperture value are blinking, this indicates being out of metering range and the proper exposure cannot be obtaind even if the shutter speed is adjusted.

Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.

134