Using an External Flash (Optional)
Using High-Speed Flash Sync ModeWith the SEF-36PZF, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless.
Attaching and Using the SEF-36PZF on the Camera1.Remove the hot shoe cover and attach the SEF-36PZF.2.Turn the mode dial and set the exposure mode to or .3.Turn on the SEF-36PZF.4.Set the SEF-36PZF sync mode to HS (high-speed flash sync.).5.Confirm that the SEF-36PZF is fully charged and then take the picture.INFORMATION
The will light in the viewfinder when the flash is ready (fully charged).
High-speed flash sync is only available when the shutter speed is faster than 1/180 sec. High-speed flash sync is not available when the exposure mode is set to (Bulb).
See the SEF-36PZF operating manual for details.
Using in Wireless ModeShoot using the flash without connecting the camera and flash with a cord by using two SEF-36PZF units.The High-speed sync mode is also available in wireless mode.
INFORMATION
Be sure to set the two SEF-36PZF units to the same channel. See the SEF-36PZF operating manual for details.